[Q77-Q99] D-PVM-OE-01 Free Update With 100% Exam Passing Guarantee [2026]

Rate this post

D-PVM-OE-01 Free Update With 100% Exam Passing Guarantee [2026]

[May-2026] Verified EMC Exam Dumps with D-PVM-OE-01 Exam Study Guide

EMC D-PVM-OE-01 Exam Syllabus Topics:

Topic	Details
Topic 1	PowerMax Family Management in a Virtual Environment: This section of the exam measures the skills of Virtualization Engineers and evaluates the integration of PowerMax storage in virtualized environments. Candidates must understand VMware vSphere, the functionalities of Virtual Storage Integrator (VSI), and how to monitor virtualized workloads using Unisphere for PowerMax. One critical skill assessed is tracking virtual machine storage performance.
Topic 2	PowerMax Family Storage Provisioning: This section of the exam measures the skills of Storage Administrators and covers the architecture, configurations, and management of the PowerMax family. Candidates must understand system models, port and device management, and provisioning methods using Unisphere for PowerMax. They are expected to perform service level-based provisioning and allocate storage through auto-provisioning groups. One key skill assessed is configuring storage using Unisphere for PowerMax.
Topic 3	PowerMax Family Local and Remote Replication Concepts: This section of the exam measures the skills of Backup and Recovery Specialists and covers the features and functionalities of TimeFinder SnapVX. Candidates must differentiate between SnapVX snapshots and clones while understanding their role in data protection. One key skill assessed is comparing the use cases of snapshots and clones.
Topic 4	PowerMax Family Monitoring and Workload Planning: This section of the exam measures the skills of Performance Analysts and focuses on monitoring storage environments and workload planning using Unisphere for PowerMax. Candidates must understand how to track performance metrics, detect issues, and optimize workloads to enhance storage efficiency. One key skill tested is monitoring storage health through Unisphere.
Topic 5	Unisphere for PowerMax 10 Implementation and Administration: This section of the exam measures the skills of System Administrators and covers the implementation and management of Unisphere for PowerMax. Candidates must understand the installation process, post-installation tasks, and interface navigation to efficiently operate the platform. One key skill evaluated is setting up Unisphere for PowerMax.

NO.77 Which SYMCLI command can be used to create a new TDEV and assign it to a Storage Group in one step?

symdev

symsg

symcfg

symaccess

NO.78 Place the steps to create a snapshot in Unisphere for PowerMax in the correct order

NO.79 When setting the TimeFinder SnapVX time-to-live with the symsnapvx command and the -delta 2 4 parameter, what does the delta parameter specify?

Minutes

Hours

Days

Weeks

NO.80 Two PowerMax arrays have been configured for replication using SRDF During a disaster recovery operation production has been transferred to the R2 devices at the target site Which operation allows the primary hosts to access the R1 devices without waiting for a data transfer to complete from the R2 devices’?

Update

Fallback

Failover

Resume

NO.81 Which Threshold levels must be set when creating customized threshold alerts in Unisphere for PowerMax?

Warning, Marginal, and Critical

Warning, Critical, and Fatal

Stable, Critical, and Fatal

Stable, Marginal, and Critical

NO.82 A Storage Group is serving host read/write I/O. The Storage Administrator started an MDM migration and ran a symdm sync -stop command, putting the migration in a CutoverNoSync migration state Where does the customer data in the Storage Group reside?

Only the target array

Only on the source array

On both the source and the target array

NO.83 What is a recommendation when using Open Replicator to migrate data from a supported third-party array to a VMAX3 array?

Host I/O to the control devices on the VMAX3 array is allowed after the migration completes

Control devices on the VMAX3 array must be set to Not Ready for the duration of the migration

Host I/O to the remote devices on the third-party array can continue during the migration

Host I/O to the remote devices on the third-party array should be stopped for the duration of the migration

NO.84 What is the status of the Host I/O paths to the target array after a Non-Disruptive Migration Cutover?

Read/Write Enabled

Write Disabled

Dead

Inactive

NO.85 What is the maximum capacity per array in a PowerMax 8500?

8 PBe

18 PBe

20 PBe

24 PBe

NO.86 In Unisphere which role has limited privileges that can only view the information about a storage array and is unable to make any configuration changes?

None

Monitor

StorageAdmin

Auditor

NO.87 Exhibit.

Which activity needs to be performed prior to the operations shown in the exhibit?

TTL setting should be changed

Snapshot should be terminated

Target volumes should be unmounted

Target volumes should be unmapped

NO.88 Refer to the exhibit.

What is the topology shown1?

Cascaded SRDF

SRDF/Star

SRDF/Metro

Concurrent SRDF

NO.89 What are the two configuration rules that apply to SRDF groups and connections during Non-Disruptive Migrations’?

The source and target arrays are at most one hop away from the control host

Two DM RDF groups are created per SG migration session

RF and RE ports are supported, with RF ports being selected if both types are available

A single array cannot have multiple DM RDF groups

DM RDF groups are configured with a minimum of one path

Step by Step Comprehensive Detailed Explanation:
Non-Disruptive Migration (NDM) is a feature in PowerMax that allows you to migrate data between storage arrays without any downtime or disruption to host applications. During NDM, SRDF (Symmetrix Remote Data Facility) is used to replicate data between the source and target arrays. Here are the configuration rules that apply to SRDF groups and connections during NDM:
* A. The source and target arrays are at most one hop away from the control host:The control host, which manages the NDM process, must have direct connectivity to both the source and target arrays.
This ensures efficient communication and control during the migration.
* E. DM RDF groups are configured with a minimum of one path:SRDF groups used for NDM (DM RDF groups) must have at least one active path between the source and target arrays. This ensures that data can be replicated continuously during the migration.
Why other options are incorrect:
* B. Two DM RDF groups are created per SG migration session:This is not a strict requirement. The number of DM RDF groups may vary depending on the configuration and the specific NDM operation.
* C. RF and RE ports are supported, with RF ports being selected if both types are available:While RF and RE ports are supported for SRDF, there’s no specific preference for RF ports during NDM. The choice of ports depends on the overall network configuration and availability.
* D. A single array cannot have multiple DM RDF groups:An array can have multiple DM RDF groups if needed for different NDM operations or configurations.
References and documents of Dell’s public documentation for PowerMax Operate v.2:
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide provides an overview of NDM and its requirements, including information about SRDF configuration.
* Dell Solutions Enabler 10.0.0 CLI User Guide:This guide provides detailed information about SRDF commands and configuration options, which are relevant for NDM operations.

NO.90 A company is setting up a multi-tenant environment where multiple departments share the same storage array with SID 1762. The IT department requires 2 TB of storage to be available on the ESXi1 host. Use
“ESXi1_SG” for the storage group name, create a port group with Dir- Ports “OR-1C:0 and OR-2C:0,” and leave all other settings at their default.

Using the simulator, provision the storage required with a single volume using auto-provisioning groups.

NO.91 What is the maximum number of systems controlled by Unisphere 360?

100

128

200

NO.92 A storage administrator is using SE 10 to query a PowerMax 2000 using symcfg list -dir and wants to seethe number of Cores that are assigned to the front-end emulations What does the storage administrator need to do?

Use the-mode v9x argument for backwards compatibility as some output has been deprecated

Look for CPU instead of Cores as these have been rebranded to allow differentiating between virtual and physical hardware.

Specify the full 12-digit serial number with -sidsoSE 10 understands the output relates to an older system model.

Use syraconf igure -version -dir as in SE 10 support for outputs specific to older systems moved to a different command.

NO.93 On a PowerMax or VMAX Family array, what is the default Dynamic I/O distribution mode setting when a Storage Group is associated with Host I/O Limits?

Balanced

Never

On Failure

Always

NO.94 Which product(s) support(s) only 7+1 in RAID 5 configurations?

VMAX3

VMAX All Flash and PowerMax 8000

VMAX All Flash and PowerMax 2000

VMAX All Flash

NO.95 The web application server web_host_1 is deprecated. Remove all resources associated with the host to clean up the environment.

Using the simulator, complete the task.

NO.96 Refer to the exhibit.

What is the Unisphere for PowerMax deployment option pictured?

Embedded

Either remote or local

Remote

Local

Step by Step Comprehensive Detailed Explanation:
Unisphere for PowerMax offers different deployment options to manage PowerMax storage arrays. Based on the exhibit, we can identify the following:
* Separate SYMAPI Server:The diagram shows a dedicated SYMAPI server. SYMAPI (Symmetrix Application Programming Interface) is a command-line interface used to manage PowerMax and VMAX storage arrays. This indicates that the Unisphere server is not directly connected to the storage arrays.
* Unisphere Server Connected to SYMAPI Server:The Unisphere server is shown to be connected to the SYMAPI server. This means that the Unisphere server relies on the SYMAPI server to communicate with the PowerMax arrays.
* No Direct Connection to Arrays:The Unisphere server does not have a direct connection to the PowerMax arrays.
Considering these points, the deployment option depicted in the exhibit is aremote deployment. In a remote deployment, the Unisphere server is installed on a separate host and communicates with the PowerMax arrays through a SYMAPI server. This allows for centralized management of multiple arrays from a single Unisphere instance.
Why other options are incorrect:
* A. Embedded:In an embedded deployment, the Unisphere software runs directly on the PowerMax array itself. This eliminates the need for a separate Unisphere server.
* B. Either remote or local:While the diagram could technically represent a local deployment with a dedicated SYMAPI server, the presence of the separate SYMAPI server and the lack of direct connection to the arrays strongly suggest a remote deployment.
* D. Local:In a local deployment, the Unisphere server is typically installed on the same host as Solutions Enabler, which has direct connectivity to the storage arrays.
References and documents of Dell’s public documentation for PowerMax Operate v.2:
* Dell Unisphere for PowerMax 10.0.0 Installation Guide:This guide provides detailed information about the different Unisphere deployment options, including local, remote, and embedded. It also includes diagrams and explanations of each deployment scenario. You can find this document on the Dell Support website by searching for “Unisphere for PowerMax Installation Guide.”
* Dell PowerMax Family: Essentials and Best Practices Guide:This guide offers a general overview of PowerMax systems and their management using Unisphere. It may provide context for understanding the different deployment options.

NO.97 How does Unisphere 360 differ from Unisphere for PowerMax?

Unisphere for PowerMax provides only GUI access to PowerMax and VMAX arrays. Unisphere 360 provides both GUI and SYMCLI access to PowerMax and VMAX arrays.

Unisphere for PowerMax provides both GUI and SYMCLI access to PowerMax and VMAX arrays.
Unisphere 360 provides only GUI access to PowerMax and VMAX arrays.

Unisphere for PowerMax provides centralized monitoring for DMX, VMAX Family, and PowerMax arrays. Unisphere 360 is the management console for PowerMax and VMAX Family arrays.

Unisphere for PowerMax is the management console for PowerMax and VMAX Family arrays.Unisphere 360 provides centralized monitoring for DMX, VMAX Family, and PowerMax arrays.

NO.98 You have just presented storage to an ESXi server and want to rescan the storage adapter to ensure the server can see the new volume Based on recommended best practices, what is the preferred method to perform this task?

Use the vSphere VSI plugin to rescan the entire cluster

Run the command from a non-cluster host using the ESX CLI

Use the vSphere Client to perform the rescan of the host

Run the command from the ESXi server with the ESX CLI enabled

NO.99 A systems administrator asks whether non-disruptive migration (NDM) is supported between their VMAX All Flash arrays. The arrays are located 800 km apart.
What information should be provided to the administrator?

NDM is only supported if the source array is running HYPERMAX OS 5977

NDM is supported between the arrays

NDM is not supported between the arrays

NDM is only supported if the target array is running PowerMax OS 5978

Authentic Best resources for D-PVM-OE-01 Online Practice Exam: https://www.real4dumps.com/D-PVM-OE-01_examcollection.html

[Q77-Q99] D-PVM-OE-01 Free Update With 100% Exam Passing Guarantee [2026]

EMC D-PVM-OE-01 Exam Syllabus Topics:

Leave a Reply Cancel reply

Related Posts

[Q108-Q123] Get Prepared for Your D-DS-FN-23 Exam With Actual EMC Study Guide!

Share Latest Dec-2024 D-PE-FN-23Test Practice Test Questions, Exam Dumps [Q28-Q49]

D-PST-MN-A-24 PDF Pass Leader, D-PST-MN-A-24 Latest Real Test [Q29-Q48]