[Jun-2023] Exam Sure Pass Fortinet Certification with NSE7_PBC-6.4 exam questions [Q14-Q30]

Rate this post

[Jun-2023] Exam Sure Pass Fortinet Certification with NSE7_PBC-6.4 exam questions

Real Fortinet NSE7_PBC-6.4 Exam Questions Study Guide

Q14. Which two statements about Amazon Web Services (AWS) networking are correct? (Choose two.)

Proxy ARP entries are disregarded.

802.1q VLAN tags are allowed inside the same virtual private cloud.

AWS DNS reserves the first host IP address of each subnet.

Multicast traffic is not allowed.

Q15.

Refer to the exhibit. The exhibit shows a topology where multiple connections from clients to the same FortiGate-VM instance, regardless of the protocol being used, are required.
Which two statements are correct? (Choose two.)

The design shows an active-active FortiGate-VM architecture.

The Cloud Load Balancer Session Affinity setting should be changed to CLIENT_IP.

The design shows an active-passive FortiGate-VM architecture.

The Cloud Load Balancer Session Affinity setting should use the default value.

Q16. Which statement about FortiSandbox in Amazon Web Services (AWS) is true?

In AWS, virtual machines (VMs) that inspect files do not have to be reset after inspecting a file.

FortiSandbox in AWS uses Windows virtual machines (VMs) to inspect files.

In AWS, virtual machines (VMs) that inspect files are constantly up and running.

FortiSandbox in AWS can have a maximum of eight virtual machines (VMs) that inspect files.

Q17.

Refer to the exhibit. Your senior administrator successfully configured a FortiGate fabric connector with the Azure resource manager, and created a dynamic address object on the FortiGate VM to connect with a windows server in Microsoft Azure. However, there is now an error on the dynamic address object, and you must resolve the issue.
How do you resolve this issue?

Run diagnose debug application azd -lon FortiGate.

In the Microsoft Azure portal, set the correct tag values for the windows server.

In the Microsoft Azure portal, access the windows server, obtain the private IP address, and assign the IP address under the FortiGate-VM AzureLab address object.

Delete the address object and recreate a new address object with the type set to FQDN.

Q18. Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

A single VPC deployment with multiple subnets and a NAT gateway

A single VPC deployment with multiple subnets

A multiple VPC deployment utilizing a transit VPC topology

A multiple VPC deployment utilizing a transit gateway

Q19. What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

Q20. You need to deploy FortiGate VM devices in a highly available topology in the Microsoft Azure cloud. The following are the requirements of your deployment:
*Two FortiGate devices must be deployed; each in a different availability zone.
*Each FortiGate requires two virtual network interfaces: one will connect to a public subnet and the other will connect to a private subnet.
*An external Microsoft Azure load balancer will distribute ingress traffic to both FortiGate devices in an active- active topology.
*An internal Microsoft Azure load balancer will distribute egress traffic from protected virtual machines to both FortiGate devices in an active-active topology.
*Traffic should be accepted or denied by a firewall policy in the same way by either FortiGate device in this topology.
Which FortiOS CLI configuration can help reduce the administrative effort required to maintain the FortiGate devices, by synchronizing firewall policy and object configuration between the FortiGate devices?

config system sdn-connector

config system ha

config system auto-scale

config system session-sync

Q21. Refer to the exhibit.

A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)

The web servers are not configured with the default gateway.

The Internet gateway (IGW) is not added to VPC (virtual private cloud).

AWS source and destination checks are enabled on the FortiGate interfaces.

AWS security groups may be blocking the traffic.

Q22. An Amazon Web Services (AWS) auto-scale FortiGate cluster has just experienced a scale-down event, terminating a FortiGate in availability zone C.
This has now black-holed the private subnet in this availability zone.
What action will the worker node automatically perform to restore access to the black-holed subnet?

The worker node applies a route table from a non-black-holed subnet to the black-holed subnet.

The worker node moves the virtual IP of the terminated FortiGate to a running FortiGate on the worker node’s private subnet interface.

The worker node modifies the route table applied to the black-holed subnet changing its default route to point to a running FortiGate on the worker node’s private subnet interface.

The worker node migrates the subnet to a different availability zone.

Q23. Refer to the exhibit.

You attempted to deploy the FortiGate-VM in Microsoft Azure with the JSON template, and it failed to boot up. The exhibit shows an excerpt from the JSON template.
What is incorrect with the template?

The LUN ID is not defined.

FortiGate-VM does not support managedDisk from Azure.

The caching parameter should be None.

The CreateOptions parameter should be FromImage.

Q24. What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

Q25. Which two statements about Microsoft Azure network security groups are true? (Choose two.)

Network security groups can be applied to subnets and virtual network interfaces.

Network security groups can be applied to subnets only.

Network security groups are stateless inbound and outbound rules used for traffic filtering.

Network security groups are a stateful inbound and outbound rules used for traffic filtering.

Q26. What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

Q27. Refer to the exhibit.

You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?

You selected the incorrect resource group.

You selected the Bring Your Own License (BYOL) licensing mode.

You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.

You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.

Q28. An organization deploys a FortiGate-VM (VM04 / c4.xlarge) in Amazon Web Services (AWS) and configures two elastic network interfaces (ENIs). Now, the same organization wants to add additional ENIs to support different workloads in their environment.
Which action can you take to accomplish this?

None, you cannot create and add additional ENIs to an existing FortiGate-VM.

Create the ENI, shut down FortiGate, attach the ENI to FortiGate, and then start FortiGate.

Create the ENI, attach it to FortiGate, and then restart FortiGate.

Create the ENI and attach it to FortiGate.

Q29. Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true?
(Choose two.)

Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.

Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.

Network ACLs must be manually applied to virtual network interfaces.

Network ACLs support allow rules and deny rules.

Q30. An organization deploys a FortiGate-VM (VM04 / c4.xlarge) in Amazon Web Services (AWS) and configures two elastic network interfaces (ENIs). Now, the same organization wants to add additional ENIs to support different workloads in their environment.
Which action can you take to accomplish this?

None, you cannot create and add additional ENIs to an existing FortiGate-VM.

Create the ENI, shut down FortiGate, attach the ENI to FortiGate, and then start FortiGate.

Create the ENI, attach it to FortiGate, and then restart FortiGate.

Create the ENI and attach it to FortiGate.

How exactly to prepare for the Fortinet NSE7_PBC-6.4i Certification

What is the prep work standards for Fortinet NSE7_PBC-6.4 Certification

Swiftly checked out the review of Fortinet NSE7_PBC-6.4 Certification

The NSE7_PBC-6.4 Certification exam is a great certification for people who want to take a step into the cybersecurity field. The Fortinet Cybersecurity Expert (NSE7) Foundations certification validates your skills in IT security fundamentals and network security essentials. You will receive valuable hands-on experience with today’s most popular network and cybersecurity tools such as firewalls, IDS/IPS, VPNs, SSLs, malware protection techniques and more. The NSE7_PBC-6.4 exam tests your skills in network security infrastructure including IPv4 and IPv6, DNS, certificates, encryption technologies, compliance and regulations such as PCI DSS, SOX and more. This is the best guide to know Fortinet NSE7_PBC-6.4 Certification for achieving your objectives in a short period of time which are also covered in our Fortinet NSE7_PBC-6.4 Dumps. So continue reading this article to learn more about passing this certification as quickly as possible.

The Fortinet NSE7_PBC-6.4 exam is a challenging exam that requires candidates to have a deep understanding of public cloud security concepts, as well as hands-on experience with Fortinet’s public cloud security solutions. The exam consists of multiple-choice questions, and candidates are required to answer 60 questions in 120 minutes.

Updated and Accurate NSE7_PBC-6.4 Questions for passing the exam Quickly: https://www.real4dumps.com/NSE7_PBC-6.4_examcollection.html

[Jun-2023] Exam Sure Pass Fortinet Certification with NSE7_PBC-6.4 exam questions [Q14-Q30]

How exactly to prepare for the Fortinet NSE7_PBC-6.4i Certification

Leave a Reply Cancel reply

Related Posts

The Fortinet NSE5_FMG-7.0 Questions & Practice Test are Available On-Demand [Q42-Q65]

Latest Fortinet NSE6_FNC-9.1 PDF and Dumps (2024) Free Exam Questions Answers [Q17-Q31]

NSE7_SDW-6.4 Dumps By Pros – 1st Attempt Guaranteed Success [Q35-Q56]