[Aug 09, 2026] NSE4_FGT-7.0 Exam Dumps PDF Updated Dump from Real4dumps Guaranteed Success [Q19-Q41]

Rate this post

[Aug 09, 2026] NSE4_FGT-7.0 Exam Dumps PDF Updated Dump from Real4dumps Guaranteed Success

Pass Your Fortinet Exam with NSE4_FGT-7.0 Exam Dumps

Fortinet NSE4_FGT-7.0 Exam Syllabus Topics:

Section	Weight	Objectives
Content Inspection	18%	– Security Profiles 1. Intrusion Prevention System 2. Antivirus 3. Application Control 4. Web Filtering – SSL Inspection 1. Deep inspection 2. Encrypted traffic analysis 3. Certificate inspection
Routing	12%	– SD-WAN 1. Configure SD-WAN members 2. Performance SLA 3. Traffic steering – Static and Dynamic Routing 1. Configure static routes 2. Routing table analysis 3. Policy routes
VPN	15%	– IPsec VPN 1. Site-to-site VPN deployment 2. IPsec troubleshooting – SSL VPN 1. Authentication and portal settings 2. Remote access configuration
Infrastructure Services	10%	– Certificates and Administration 1. Certificate management 2. System maintenance – Network Services 1. DNS configuration 2. DHCP services 3. NTP configuration
Firewall Policies and Authentication	22%	– Firewall Policies 1. Policy order and matching logic 2. Implement NAT options 3. Configure security policies – Authentication 1. Deploy firewall authentication methods 2. Configure FSSO integration 3. Configure user authentication
Deployment and System Configuration	23%	– High Availability 1. Verify HA operation 2. Configure FGCP HA clusters – Security Fabric 1. Configure Fabric connectors 2. Monitor Fabric topology 3. Implement Security Fabric – Diagnostics 1. Diagnose connectivity issues 2. Troubleshoot resource utilization – Initial Configuration 1. Configure interfaces and zones 2. Manage administrator access 3. Configure basic FortiGate settings

Q19. Which Security rating scorecard helps identify configuration weakness and best practice violations in your network?

Fabric Coverage

Automated Response

Security Posture

Optimization

Q20. Which two statements about SSL VPN between two FortiGate devices are true? (Choose two.)

The client FortiGate requires a client certificate signed by the CA on the server FortiGate.

The client FortiGate requires a manually added route to remote subnets.

The client FortiGate uses the SSL VPN tunnel interface type to connect SSL VPN.

Server FortiGate requires a CA certificate to verify the client FortiGate certificate.

Q21. Refer to the exhibit to view the application control profile.

Users who use Apple FaceTime video conferences are unable to set up meetings.
In this scenario, which statement is true?

Apple FaceTime belongs to the custom monitored filter.

The category of Apple FaceTime is being monitored.

Apple FaceTime belongs to the custom blocked filter.

The category of Apple FaceTime is being blocked.

Q22. Exhibit:

Refer to the exhibit to view the authentication rule configuration In this scenario, which statement is true?

IP-based authentication is enabled

Route-based authentication is enabled

Session-based authentication is enabled.

Policy-based authentication is enabled

Q23. Which three statements about a flow-based antivirus profile are correct? (Choose three.)

IPS engine handles the process as a standalone.

FortiGate buffers the whole file but transmits to the client simultaneously.

If the virus is detected, the last packet is delivered to the client.

Optimized performance compared to proxy-based inspection.

Flow-based inspection uses a hybrid of scanning modes available in proxy-based inspection.

Q24. Refer to the exhibit.

The exhibit contains a network interface configuration, firewall policies, and a CLI console configuration.
How will FortiGate handle user authentication for traffic that arrives on the LAN interface?

If there is a full-through policy in place, users will not be prompted for authentication.

Users from the Sales group will be prompted for authentication and can authenticate successfully with the correct credentials.

Authentication is enforced at a policy level; all users will be prompted for authentication.

Users from the HR group will be prompted for authentication and can authenticate successfully with the correct credentials.

Q25. Examine this FortiGate configuration:

How does the FortiGate handle web proxy traffic coming from the IP address 10.2.1.200 that requires authorization?

It always authorizes the traffic without requiring authentication.

It drops the traffic.

It authenticates the traffic using the authentication scheme SCHEME2.

It authenticates the traffic using the authentication scheme SCHEME1.

Q26. Which statement correctly describes NetAPI polling mode for the FSSO collector agent?

The collector agent uses a Windows API to query DCs for user logins.

NetAPI polling can increase bandwidth usage in large networks.

The collector agent must search security event logs.

The NetSession Enum function is used to track user logouts.

Q27. Refer to the exhibit.

Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?

Custom permission for Network

Read/Write permission for Log & Report

CLI diagnostics commands permission

Read/Write permission for Firewall

Q28. An administrator has configured two-factor authentication to strengthen SSL VPN access. Which additional best practice can an administrator implement?

Configure Source IP Pools.

Configure split tunneling in tunnel mode.

Configure different SSL VPN realms.

Configure host check.

Q29. Refer to the exhibit.

Which contains a network diagram and routing table output.
The Student is unable to access Webserver.
What is the cause of the problem and what is the solution for the problem?

The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1.

The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1.

The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3.

The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3.

Q30. Refer to the exhibit.

The exhibit shows the IPS sensor configuration.
If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)

The sensor will allow attackers matching the NTP.Spoofed.KoD.DoS signature.

The sensor will block all attacks aimed at Windows servers.

The sensor will reset all connections that match these signatures.

The sensor will gather a packet log for all matched traffic.

Q31. Refer to the exhibit.

The exhibit shows the IPS sensor configuration.
If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)

The sensor will allow attackers matching the NTP.Spoofed.KoD.DoS signature.

The sensor will block all attacks aimed at Windows servers.

The sensor will reset all connections that match these signatures.

The sensor will gather a packet log for all matched traffic.

Q32. Refer to the exhibit.

A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up. but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, what configuration change will bring phase 2 up?

On HQ-FortiGate, enable Auto-negotiate.

On Remote-FortiGate, set Seconds to 43200.

On HQ-FortiGate, enable Diffie-Hellman Group 2.

On HQ-FortiGate, set Encryption to AES256.

Q33. Refer to the exhibit, which contains a session diagnostic output.

Which statement is true about the session diagnostic output?

The session is a UDP unidirectional state.

The session is in TCP ESTABLISHED state.

The session is a bidirectional UDP connection.

The session is a bidirectional TCP connection.

Q34. Refer to the exhibit.

The exhibit shows a CLI output of firewall policies, proxy policies, and proxy addresses.
How does FortiGate process the traffic sent to http://www.fortinet.com?

Traffic will be redirected to the transparent proxy and it will be allowed by proxy policy ID 3.

Traffic will not be redirected to the transparent proxy and it will be allowed by firewall policy ID 1.

Traffic will be redirected to the transparent proxy and It will be allowed by proxy policy ID 1.

Traffic will be redirected to the transparent proxy and it will be denied by the proxy implicit deny policy.

Q35. Which two VDOMs are the default VDOMs created when FortiGate is set up in split VDOM mode? (Choose two.)

FG-traffic

Mgmt

FG-Mgmt

Root

Q36. You have enabled logging on your FortiGate device for Event logs and all Security logs, and you have set up logging to use the FortiGate local disk.
What is the default behavior when the local disk is full?

Logs are overwritten and the only warning is issued when log disk usage reaches the threshold of 95%.

No new log is recorded until you manually clear logs from the local disk.

Logs are overwritten and the first warning is issued when log disk usage reaches the threshold of 75%.

No new log is recorded after the warning is issued when log disk usage reaches the threshold of 95%.

Q37. Refer to the exhibit.

The exhibit contains a network diagram, virtual IP, IP pool, and firewall policies configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10 .0.1.254. /24.
The first firewall policy has NAT enabled using IP Pool.
The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT the internet traffic coming from a workstation with the IP address 10.0.1.10?

10.200.1.1

10.200.3.1

10.200.1.100

10.200.1.10

Q38. Refer to the exhibits.

Exhibit A shows system performance output. Exhibit B shows a FortiGate configured with the default configuration of high memory usage thresholds. Based on the system performance output, which two statements are correct? (Choose two.)

Administrators can access FortiGate only through the console port.

FortiGate has entered conserve mode.

FortiGate will start sending all files to FortiSandbox for inspection.

Administrators cannot change the configuration.

Q39. Which statement is correct regarding the inspection of some of the services available by web applications embedded in third-party websites?

The security actions applied on the web applications will also be explicitly applied on the third-party websites.

The application signature database inspects traffic only from the original web application server.

FortiGuard maintains only one signature of each web application that is unique.

FortiGate can inspect sub-application traffic regardless where it was originated.

Q40. Refer to the exhibit.

The exhibit contains a network diagram, central SNAT policy, and IP pool configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24.
The LAN (port3) interface has the IP address 10.0.1.254/24.
A firewall policy is configured to allow to destinations from LAN (port3) to WAN (port1).
Central NAT is enabled, so NAT settings from matching Central SNAT policies will be applied.
Which IP address will be used to source NAT the traffic, if the user on Local-Client (10.0.1.10) pings the IP address of Remote-FortiGate (10.200.3.1)?