[Sep 05, 2026] Get Latest and 100% Accurate NSE4_FGT-7.0 Exam Questions [Q102-Q123]

Rate this post

[Sep 05, 2026] Get Latest and 100% Accurate NSE4_FGT-7.0 Exam Questions

Maximum Grades By Making ready With NSE4_FGT-7.0 Dumps

Fortinet NSE4_FGT-7.0 Exam Syllabus Topics:

Section Weight Objectives
Topic 1: Content Inspection 18% – Security Profiles

  • 1. Intrusion Prevention System
  • 2. Application Control
  • 3. Web Filtering
  • 4. Antivirus

– SSL Inspection

  • 1. Certificate inspection
  • 2. Deep inspection
  • 3. Encrypted traffic analysis
Topic 2: VPN 15% – IPsec VPN

  • 1. IPsec troubleshooting
  • 2. Site-to-site VPN deployment

– SSL VPN

  • 1. Authentication and portal settings
  • 2. Remote access configuration
Topic 3: Firewall Policies and Authentication 22% – Authentication

  • 1. Configure FSSO integration
  • 2. Configure user authentication
  • 3. Deploy firewall authentication methods

– Firewall Policies

  • 1. Policy order and matching logic
  • 2. Implement NAT options
  • 3. Configure security policies
Topic 4: Deployment and System Configuration 23% – Security Fabric

  • 1. Monitor Fabric topology
  • 2. Configure Fabric connectors
  • 3. Implement Security Fabric

– Initial Configuration

  • 1. Configure interfaces and zones
  • 2. Manage administrator access
  • 3. Configure basic FortiGate settings

– High Availability

  • 1. Configure FGCP HA clusters
  • 2. Verify HA operation

– Diagnostics

  • 1. Troubleshoot resource utilization
  • 2. Diagnose connectivity issues
Topic 5: Infrastructure Services 10% – Certificates and Administration

  • 1. System maintenance
  • 2. Certificate management

– Network Services

  • 1. NTP configuration
  • 2. DHCP services
  • 3. DNS configuration
Topic 6: Routing 12% – Static and Dynamic Routing

  • 1. Configure static routes
  • 2. Policy routes
  • 3. Routing table analysis

– SD-WAN

  • 1. Performance SLA
  • 2. Traffic steering
  • 3. Configure SD-WAN members

 

Q102. Refer to the exhibit.

Examine the intrusion prevention system (IPS) diagnostic command.
Which statement is correct If option 5 was used with the IPS diagnostic command and the outcome was a decrease in the CPU usage?

 
 
 
 

Q103. A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address is dynamic. In addition, the remote peer does not support a dynamic DNS update service.
What type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work?

 
 
 
 

Q104. Which two attributes are required on a certificate so it can be used as a CA certificate on SSL Inspection? (Choose two.)

 
 
 
 

Q105. Refer to the exhibits.
Exhibit A.

Exhibit B.

An administrator creates a new address object on the root FortiGate (Local-FortiGate) in the security fabric. After synchronization, this object is not available on the downstream FortiGate (ISFW).
What must the administrator do to synchronize the address object?

 
 
 
 

Q106. You have enabled logging on your FortiGate device for Event logs and all Security logs, and you have set up logging to use the FortiGate local disk.
What is the default behavior when the local disk is full?

 
 
 
 

Q107. An administrator needs to increase network bandwidth and provide redundancy.
What interface type must the administrator select to bind multiple FortiGate interfaces?

 
 
 
 

Q108. By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers.
Which CLI command will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?

 
 
 
 

Q109. Refer to the exhibit.

According to the certificate values shown in the exhibit, which type of entity was the certificate issued to?

 
 
 
 

Q110. An administrator must disable RPF check to investigate an issue.
Which method is best suited to disable RPF without affecting features like antivirus and intrusion prevention system?

 
 
 
 

Q111. Which two statements are correct about a software switch on FortiGate? (Choose two.)

 
 
 
 

Q112. An administrator does not want to report the logon events of service accounts to FortiGate. What setting on the collector agent is required to achieve this?

 
 
 
 

Q113. Refer to the exhibit.

The exhibits show a network diagram and the explicit web proxy configuration.
In the command diagnose sniffer packet, what filter can you use to capture the traffic between the client and the explicit web proxy?

 
 
 
 

Q114. Refer to the exhibit.

Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?

 
 
 
 

Q115. If Internet Service is already selected as Source in a firewall policy, which other configuration objects can be added to the Source filed of a firewall policy?

 
 
 
 

Q116. Refer to the exhibit.

The Root and To_Internet VDOMs are configured in NAT mode. The DMZ and Local VDOMs are configured in transparent mode.
The Root VDOM is the management VDOM. The To_Internet VDOM allows LAN users to access the internet. The To_Internet VDOM is the only VDOM with internet access and is directly connected to ISP modem.
With this configuration, which statement is true?

 
 
 
 

Q117. Examine the IPS sensor configuration shown in the exhibit, and then answer the question below.


An administrator has configured the WINDOWS_SERVERS IPS sensor in an attempt to determine whether the influx of HTTPS traffic is an attack attempt or not. After applying the IPS sensor, FortiGate is still not generating any IPS logs for the HTTPS traffic.
What is a possible reason for this?

 
 
 
 
 

Q118. An administrator has configured outgoing Interface any in a firewall policy. Which statement is true about the policy list view?

 
 
 
 

Q119. Refer to the exhibit, which contains a radius server configuration.

An administrator added a configuration for a new RADIUS server. While configuring, the administrator selected the Include in every user group option.
What will be the impact of using Include in every user group option in a RADIUS configuration?

 
 
 
 

Q120. Exhibit:

Refer to the exhibit to view the authentication rule configuration In this scenario, which statement is true?

 
 
 
 

Q121. Refer to the exhibit.

Given the interfaces shown in the exhibit. which two statements are true? (Choose two.)

 
 
 
 

Q122. Refer to the exhibit.

Which contains a Performance SLA configuration.
An administrator has configured a performance SLA on FortiGate. Which failed to generate any traffic. Why is FortiGate not generating any traffic for the performance SLA?

 
 
 
 

Q123. An administrator does not want to report the logon events of service accounts to FortiGate. What setting on the collector agent is required to achieve this?

 
 
 
 

Give push to your success with NSE4_FGT-7.0 exam questions: https://www.real4dumps.com/NSE4_FGT-7.0_examcollection.html

Related Links: writeablog.net www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw www.stes.tyc.edu.tw

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below