D-PST-MN-A-24 PDF Pass Leader, D-PST-MN-A-24 Latest Real Test [Q29-Q48]

Rate this post

D-PST-MN-A-24 PDF Pass Leader, D-PST-MN-A-24 Latest Real Test

Valid D-PST-MN-A-24 Test Answers & D-PST-MN-A-24 Exam PDF

EMC D-PST-MN-A-24 Exam Syllabus Topics:

Topic	Details
Topic 1	Troubleshooting: In this section of the exam, the focus is on troubleshooting techniques for PowerStore systems. It includes interpreting hardware fault LEDs, using PowerStore Manager alerts for diagnostics, and employing the PowerStore Command Line Interface (PSTCLI) for troubleshooting.
Topic 2	PowerStore Implementation: This segment delves into the implementation of PowerStore networks. It examines Ethernet switching, network requirements, and configuration options.
Topic 3	PowerStore Maintenance: This part addresses maintenance procedures for PowerStore systems. It covers handling protocols, customer-replaceable units (CRUs), and field-replaceable units (FRUs).
Topic 4	PowerStore Concepts and Features: This part of the exam covers PowerStore system and use cases, PowerStore system configuration and models and frameworks, and PowerStore architecture and hardware components.

NO.29 A Storage Administrator ran a PSTCLI command on a Linux host. The error ” -bash: pstcli: command not found” appears. How is the problem resolved?

Add /opt/dellemc/pstcli/bin/ in PSTCLI.sh

Run rpm -ihv pstcli to reinstall the PSTCLI software on the Linux host

Install in default directory /opt/dellemc/pstcli-version/bin/

Add the installation directory to the PATH variable on shell initialization file

NO.30 When looking at the base enclosure front view, what does a solid amber drive LED indicate?

Faulted drive

Normal activity

Rebuild activity

Discover new drive

NO.31 What is a step in configuring the ToR data switches for a Dell EMC PowerStore T?

Configure a port for the discovery laptop

Create VLAN for vMotion networks

Configure ports for management on native VLAN

Create VLANs for NAS server networks

NO.32 Which number in the code-naming schema represents a beta distribution?

NO.33 What describes Dell EMC PowerStore X front-end cabling?

Uses internal VMware virtual switching and does not require a management network

Management and discovery use the same cables and connections as storage

Storage and management use the same LACP bonded cable connection

Uses VLTi data switch interconnectivity to support vMotion networks

NO.34 What is the protocol used for the storage network?

NFS

iSCSI

SMB

NO.35 Which component is an FRU?

DIMMs

Embedded IO Module

Nodes

Battery Backup Unit

NO.36 What safety equipment is critical to have on hand to avoid equipment failure before replacing any components in a Dell EMC PowerStore array?

Stabilization Kit

Rail Kit

Maintenance Kit

ESD Kit

NO.37 The “svc_rescue_state list” shows a node in service mode. How can the node be returned to normal mode?

svc_rescue_state quit

svc_rescue_state clear

svc_rescue_state normal

svc_rescue_state exit

NO.38 How can the PUHC health check results be viewed?

From syslog server

In Details of Appliances and Nodes

From management DB

By accessing the Swagger UI

NO.39 A Storage Administrator notices a Critical alert present in Dell EMC PowerStore Manager relating to data integrity. What action within the alert details slide-out panel is helpful in troubleshooting the problem?

Examine Notifications to obtain a list of corrective actions

Access the Repair Flow link to schedule a support engagement

Re-engage support through previous listed Related Events

Select the Gather Support Materials from Service and Support

NO.40 Refer to the exhibit.

Refer to the exhibit.
What Dell EMC PowerStore ToR front-end cabling is shown?

VLT interconnectivity

OOB Management

Management and discovery

Core switch uplink

NO.41 When a Dell EMC PowerStore node powers up in service mode, what are the commands and sequence used from the appliance SSH client to restore the node back to normal?

svc_node restart
svc_rescue_state start

svc_node shutdown
svc_rescue_state clear

svc_rescue_state clear
svc_node reboot

svc_rescue_state normal
svc_node start

NO.42 What describes the SAS cabling when adding an expansion enclosure to a Dell EMC PowerStore, for each node and expansion enclosure side?

SAS cabling goes from existing B ports to new A ports.
At the last enclosure, SAS cabling returns from the B ports to the alternate node’s A ports.

SAS cabling goes from existing A ports to new B ports.
At the last enclosure, SAS cabling returns from the A ports to the originating node’s B ports.

SAS cabling goes from existing B ports to new A ports.
At the last enclosure, SAS cabling returns from the B ports to the originating node’s A ports.

SAS cabling goes from existing A ports to new B ports.
At the last enclosure, SAS cabling returns from the A ports to the alternate node’s B ports.

NO.43 Which type of device is supported in expansion enclosures?

NVMe SCM

SAS SSD

NVMe NVRAM

NVMe SSD

NO.44 A Storage Administrator needs to connect through SSH to run svc commands. How is the SSH session configured?

NAS server IP address using port 22

Appliance IP address using port 26

NAS server IP address using port 26

Appliance IP address using port 22

NO.45 A Storage Administrator has an existing single appliance Dell EMC PowerStore 3000T cluster. An additional PowerStore 9000T has been purchased to add into the existing cluster.
How does the administrator proceed?

Add the new 9000T appliance into the cluster per the procedure; mixed models of the same type are supported

Additional VLT links on the ToR switching must be configured for the 9000T to support the increased inter-switch network load

The new appliance cannot be added to the cluster; appliance model and type must match when clustering appliances together

Remove two of the four NVMe NVRAM drives from the 9000T; the caching configuration of all clustered appliances must match

NO.46 What is the result of setting a VLAN ID of 0 on a network when running ICW for Dell EMC PowerStore?

Default route is set

Network will pass tagged traffic

Network will pass untagged traffic

Static route is set

NO.47 Which component can be replaced while the Dell EMC PowerStore is up and running?

SFP

4-Port Mezz card

M.2 Device

LCC

NO.48 In which step of the ICW can the configuration details be exported?

License Configuration

Support Assist

Cluster Configuration

Cluster Details

D-PST-MN-A-24 Dumps Ensure Your Passing: https://www.real4dumps.com/D-PST-MN-A-24_examcollection.html

D-PST-MN-A-24 PDF Pass Leader, D-PST-MN-A-24 Latest Real Test [Q29-Q48]

EMC D-PST-MN-A-24 Exam Syllabus Topics:

Leave a Reply Cancel reply

Related Posts

[Sep 23, 2023] Fully Updated DES-1D12 Dumps – 100% Same Q&A In Your Real Exam [Q17-Q31]

Share Latest Dec-2024 D-PE-FN-23Test Practice Test Questions, Exam Dumps [Q28-Q49]

Updated Jul-2022 Exam DEA-41T1 Dumps – Pass Your Certification Exam [Q64-Q87]