Free SMI300XS pdf Files With Updated and Accurate Dumps Training [Q18-Q41]

NO.18 Why is there a yellow warning label on the flat panel/ribbon cable?

NO.19 The SKU for the NVMe backplane is BPN-NVME5-HS219N-S24. True or False?

NO.20 After removing the screws from the midplane bracket, what cables must be removed?(Choose 2 answers.)

NO.21 Before you can remove the NVMe backplane (BPN-NVME5-HS219N-S24) from the motherboard tray, what should you do with the hard drives in the system?

NO.22 When reinstalling the motherboard tray, is it necessary to align it properly with the chassis grooves before securing it with screws? True or False?

NO.23 Which two situations could occur if you forcefully shift the release lever without first unlocking the red lock?(Choose 2 answers.)

NO.24 Exhibit:

How many screws need to be removed from the support bar located at the rear of the motherboard tray?

NO.25 To remove the midplane, use both hands to lift the midplane bracket straight up and out of the chassis. True or False?

NO.26 What could happen to the system if the cables connecting the AOM card to the motherboard are not returned to their proper port locations?

NO.27 Exhibit:

4 screws secure the backplane to the motherboard tray that you will need to remove, and they are spaced equidistant across the backplane. True or False?

NO.28 Exhibit:

The 2 cables attached to the midplane on the side closest to the PCIe tray that need to be removed are the I2C cable and power cable. True or False?

NO.29 Exhibit:

What is the proper way to remove the backplane from the motherboard tray?

NO.30 What equipment is required in order to remove the heatsink from the motherboard tray?

NO.31 Exhibit:

There is a flap door over the ribbon cable connection. To open it, use your finger to press down on the top of the flap door and pop it open. True or False?

NO.32 Exhibit:

When installing the midplane bracket back into the chassis, what design feature in the chassis helps you properly align the midplane bracket?

NO.33 Before removing the midplane from the AS-8125GS-TNMR2, you must disengage all the power supply units (PSUs) and dummy PSUs, as well as the PCIe tray, motherboard tray, and GPU tray. True or False?

NO.34 When installing the NVMe backplane back into the motherboard tray, what cables need to be reconnected?

NO.35 Before reinstalling the motherboard tray, what critical step should be taken to ensure proper installation?