NACE-CIP2-001 Updated Exam Dumps [2024] Practice Valid Exam Dumps Question [Q22-Q39]

NO.22 Pre-cleaning of work pieces will NOT remove

NO.23 You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.
Your FIRST preferred course of action is to:

NO.24 Inspectors perform tests on linings that they may not perform on exterior coatings because

NO.25 The solvent sensitivity/solvent wipe test (ASTM D4752) is used to determine the cure of

NO.26 Inspector reports should always be copied to:

NO.27 When NACE/SSPC WJ 1 is referenced; what type of equipment would the Inspector expect to see on the job:

NO.28 You have just your NACE CIP Level 2 certification when you are asked to supervise a team of uncertified field pipeline inspectors.
Your FIRST preferred course of action is to:

NO.29 Measuring methyl ethyl ketone (MEK) resistance of ethyl silicate inorganic zinc-rich primers by solvent rub requires

NO.30 Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?

NO.31 When observing design defects the NACE Inspector should:

NO.32 You are the NACE Level 2 Inspector on a project where overcoating of galvanized steel is being performed. The specification references SSPC SP 16 as the surface preparation method. At the pre-job meeting operations personnel make it clear that abrasive blasting will not permitted. The Owner’s representative asks you what other methods might be used.
Of the options shown below, what would be the preferred option in this situation?

NO.33 Thermal Spray coatings provide:

NO.34 Differences in technique for abrasive blasting concrete versus steel require the operator to:

NO.35 The primary purpose of Fireproofing coatings are to provide:

NO.36 When environmental enclosures are being used an inspector needs to be concerned about:

NO.37 Individuals conducting Coating Surveys should:

NO.38 You are the NACE Inspector on a project where a stationary floating structure is being coated and you notice a self-smoothing anti-fouling coating has been specified.
This is not a good choice because:

NO.39 Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?