[2024] Pass Key features of JN0-363 Course with Updated 293 Questions [Q138-Q159]

Rate this post

[2024] Pass Key features of JN0-363 Course with Updated 293 Questions

JN0-363 Sample Practice Exam Questions 2024 Updated Verified

NEW QUESTION 138
Exhibit

Referring to the exhibit, what must be included in the Route1 configuration when establishing an EBGP session with the ISP?

A local address must be specified.

A local AS must be specified.

The BGP session type internal must be specified.

The BGP session type external must be specified.

NEW QUESTION 139
Referring to the exhibit, which two statements are correct? (Choose two.)

Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0/1 unchanged.

Traffic ingressing ge-0/0/0 that is tagged will VLAN 100 will be dropped.

Traffic ingressing ge0/0/0 that Is tagged with VLAN 200 will egress ge-0/0/1 with an outer VLAN tag of 200.

Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0M with an outer VLAN tag of 200.

NEW QUESTION 140
You own a small company and need to assign IPv6 addresses to your routers. Because you want to follow the guidelines spelled out in RFC 3177, you want to design your network with the correct prefixes.Which prefix would your ISP likely allocate to your company?

47-bit prefix

48-bit prefix

64-bit prefix

128-bit prefix

NEW QUESTION 141
When would you use the qualified-next-hop statement with a static route?

You can use it to install the static route into different routing tables.

You can use it to send unwanted traffic to a null route.

You can use it to specify multiple next hops with different preferences.

You can use it to resolve the next hop if the next hop is not directly connected.

NEW QUESTION 142
When would you use the qualified-next-hop statement with a static route?

You can use it to install the static route into different routing tables.

You can use it to send unwanted traffic to a null route.

You can use it to specify multiple next hops with different preferences.

You can use it to resolve the next hop if the next hop is not directly connected.

NEW QUESTION 143
Which OSPF database packet determines which router is in charge of the database synchronization and the transferring of LSA headers between the two systems?

link-state request

database description

hello

link-state update

NEW QUESTION 144
Click the Exhibit button.

Referring to the exhibit, which statement about the IS-IS interface is true?

The ge-0/0/0.0 interface will act as an L1/L2 interface

The ge-0/0/0.0 interface will act as an L2 interface only

The ge-0/0/0.0 interface will act as an L1 interface only

The ge-0/0/0.0 interface will not be assigned to a level

NEW QUESTION 145
Click the Exhibit button.

You are troubleshooting a new BGP peering session which is not establishing.
Referring to the exhibit, which statement is true?

The update messages contain an unsupported option

The neighbor does not support IPv6

The peer’s AS number is misconfigured

The TCP session is not establishing

NEW QUESTION 146
Exhibit.

Referring to the exhibit, you have configured an aggregate route that represents the 172.21.0.0/24, 172.21.1.0/24, and 172.21.2.0/24 networks. However, when you view the routing table, your new route hidden.
Which action would you perform to determine the problem?

Verify that you have active contributing routes on the device.

Verify that you have configured a policy on the device to accept aggregate routes.

Verify that you have defined a metric value for the aggregate route.

Verify that you have set the preference to a lower default value.

NEW QUESTION 147
What Is a key differentiators of generate routes from aggregate routes?

Generate routes use a forwarding next hop.

Generate routes have a default next-hop value of reject.

Generate routes have a default preference value of 210.

Generate routes cannot be used as a gateway of last resort.

NEW QUESTION 148
The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating with the respective bandwidth reservations.
Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?

R4 -> R1 -> R2 -> R5 -> R6

R4 -> R5 -> R6

R4 -> R5 -> R2 -> R3 -> R6

R4 -> R1 -> R2 -> R3 -> R6

NEW QUESTION 149
The segment touting SRGB start label Is 10,000 and the SRGB index range is 500.
In this scenario, which two statements are correct? (Choose two.)

The first usable label is 10,001.

The last usable label is 10.501.

The last usable label is 10,499.

The first usable label Is 10,000.

NEW QUESTION 150
Exhibit

You are asked to configure the OSPF environment to prevent the DRother routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?

set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255

set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0

set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma

set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type p2p

NEW QUESTION 151
Which statement is true when using VLANs in a bridge domain on an MX Series device?

The VLAN tags of the received packet are always translated.

Only outer VLAN tags can be normalized.

The VLAN tag of the received packet must match the VLAN tags associated with one of the logical interfaces.

Outer and inner VLAN tags always checked at egress.

NEW QUESTION 152
Which configuration can be applied to ensure that no more than 600 MAC addresses are learned by a virtual switch?

Option A

Option B

Option C

Option D

NEW QUESTION 153
Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

The BGP peering between R1 and R4 should use loopback interface addresses

The BGP peering between R1 and R4 should use physical interface addresses

The BGP peerings between R1, R2, and R3 should use loopback interface addresses

The BGP peerings between R1, R2, and R3 should use physical interface addresses

NEW QUESTION 154
Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)

ring

tree

star

mesh

NEW QUESTION 155
Which OSPF database packet determines which router is in charge of the database synchronization and the transferring of LSA headers between the two systems?

link-state request

database description

hello

link-state update

NEW QUESTION 156
Exhibit

Which two statements are correct about the information shown in the exhibit? (Choose two.)

The root bridge is reachable using the ge-0/0/14 interface.

This switch is the root bridge for this spanning tree topology.

This switch has a bridge priority of 8k.

The root bridge’s priority Is 4k.

NEW QUESTION 157
Click the Exhibit button. Referring to the exhibit, from which device(s) does R3 learn about Route X?

both R2 and R1

R1 only

directly from the router in AS 64502

R2 only

NEW QUESTION 158
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers.
Which statement is true about the DIS election in this scenario?

The router with the highest MAC address will be elected as the DIS.

The router with the highest numerical lo0 IP address will be elected as the DIS.

The router with the lowest numerical lo0 IP address will be elected as the DIS.

The router with the lowest MAC address will be elected as the DIS.

NEW QUESTION 159
Exhibit

You are advertising a summary route that represents your local network (172.20.0.0716) to both ISP A and ISPB. You want to influence all traffic sent to you from ISP C to go through R2.
How would you accomplish this task?

On R1, prepend your AS number three times on the 172.20.0.0/16 route when advertising It to ISP 1.

On R1, change the local preference value to 250.

On R2. prepend your AS number three times on the 172.20.0.0/16 route when advertising it to ISP 2.

On R2, change the local preference value to 50.

To be eligible for the JNCIS-SP certification, candidates must have a basic understanding of networking and the OSI model, as well as a working knowledge of Junos OS. They should also have experience working with service provider routing and switching technologies and be familiar with protocols such as BGP, OSPF, and IS-IS.

The New JN0-363 2024 Updated Verified Study Guides & Best Courses: https://www.real4dumps.com/JN0-363_examcollection.html

[2024] Pass Key features of JN0-363 Course with Updated 293 Questions [Q138-Q159]

Leave a Reply Cancel reply

Related Posts

[May-2023] The Juniper JN0-363 Exam Test For Brief Preparation [Q153-Q174]

Get Perfect Results with Premium JN0-351 Dumps Updated 67 Questions [Q32-Q54]

First Attempt Guaranteed Success in JN0-663 Exam 2023 [Q54-Q78]