NSE6_FWF-6.4 PDF Pass Leader, NSE6_FWF-6.4 Latest Real Test [Q16-Q40]

Rate this post

NSE6_FWF-6.4 PDF Pass Leader, NSE6_FWF-6.4 Latest Real Test

Valid NSE6_FWF-6.4 Test Answers & NSE6_FWF-6.4 Exam PDF

The Fortinet NSE6_FWF-6.4 exam covers a wide range of topics such as Fortinet Secure WLAN Architecture, Radio Frequency (RF) Fundamentals, WLAN Security, and WLAN Troubleshooting. Candidates are expected to have a solid understanding of wireless networking principles, security protocols, and Fortinet’s WLAN architecture. Fortinet NSE 6 – Secure Wireless LAN 6.4 certification is suitable for professionals who are responsible for managing and securing wireless networks in organizations of all sizes, from small businesses to large enterprises.

NO.16 What type of design model does FortiPlanner use in wireless design project?

Architectural model

Predictive model

Analytical model

Integration model

NO.17 Which administrative access method must be enabled on a FortiGate interface to allow APs to connect and function?

Security Fabric

SSH

HTTPS

FortiTelemetry

NO.18 A tunnel mode SSID is configured on a FortiGate wireless controller.
Which task must be completed before the SSID can be used?

The new network must be manually assigned to a FortiAP profile.

The wireless network interface must be assigned a Layer 3 address.

Security Fabric and HTTPS must be enabled on the wireless network interface.

The wireless network to Internet firewall policy must be configured.

NO.19 Refer to the exhibit.

If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility

Areas with the signal strength weaker than -68 dB are cut out of the map

Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor

Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.

NO.20 Which two statements about background rogue scanning are correct? (Choose two.)

A dedicated radio configured for background scanning can support the connection of wireless clients

When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

Background rogue scanning requires DARRP to be enabled on the AP instance

A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band

NO.21 Which statement is correct about security profiles on FortiAP devices?

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic

Only bridge mode SSIDs can apply the security profiles

Disable DTLS on FortiAP

FortiGate performs inspection the wireless traffic

NO.22 Where in the controller interface can you find a wireless client’s upstream and downstream link rates?

On the AP CLI, using the cw_diag ksta command

On the controller CLI, using the diag wireless-controller wlac -d sta command

On the AP CLI, using the cw_diag -d sta command

On the controller CLI, using the WiFi Client monitor

NO.23 What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?

DHCP

Static

Broadcast

Multicast

NO.24 Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

DARRP measurements can be scheduled to occur at specific times.

DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

NO.25 Which statement describes FortiPresence location map functionality?

Provides real-time insight into user movements

Provides real-time insight into user purchase activity

Provides real-time insight into user usage stats

Provides real-time insight into user online activity

NO.26 Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)

AP Manager

FortiAP Cloud

FortiSwitch

FortiGate

NO.27 Which two roles does FortiPresence analytics assist in generating presence reports? (Choose two.)

Gathering details about on site visitors

Predicting the number of guest users visiting on-site

Comparing current data with historical records

Reporting potential threats by guests on site

NO.28 Which statement is correct about security profiles on FortiAP devices?

Security profiles can only be applied to unencrypted wireless traffic.

Security profiles can only be applied via firewall policies on the FortiGate.

Security profiles are only supported on Bridge-mode SSIDs.

Security profiles on FortiAP devices can use FortiGate subscription to inspect the traffic.

NO.29 As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?

Configure the APs individually by overriding the settings in Managed FortiAPs

Configure the controller for the correct country code for Germany

Clone a suitable FortiAP profile and change the county code settings on the profile

Create a new FortiAP profile and change the county code settings on the profile

NO.30 Refer to the exhibit.

If the signal is set to -68 dB on the FortiPlanner site survey reading, which statement is correct regarding the coverage area?

Areas with the signal strength equal to -68 dB are zoomed in to provide better visibility

Areas with the signal strength weaker than -68 dB are cut out of the map

Areas with the signal strength equal or stronger than -68 dB are highlighted in multicolor

Areas with the signal strength weaker than -68 dB are highlighted in orange and red to indicate that no signal was propagated by the APs.

NO.31 Which two phases are part of the process to plan a wireless design project? (Choose two.)

Project information phase

Hardware selection phase

Site survey phase

Installation phase

NO.32 Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and Io devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?

Increase the transmission power of the AP radios

Enable frequency handoff on the AP to band steer clients

Reduce the number of wireless networks being broadcast by the AP

Install another AP in the reception area to improve available bandwidth

NO.33 When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)

An X.509 certificate to authenticate the client

An X.509 to authenticate the authentication server

A WPA2 or WPA3 personal wireless network

A WPA2 or WPA3 Enterprise wireless network

NO.34 When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)

Control channels

Security channels

FortLink channels

Data channels

NO.35 Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)

DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.

DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.

DARRP measurements can be scheduled to occur at specific times.

DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.

NO.36 Refer to the exhibits.
Exhibit A

Exhibit B

The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?

WPA2 Enterprise

WPA3 Enterprise

WPA2 Personal and radius MAC filtering

Open, with radius MAC filtering

NO.37 Which factor is the best indicator of wireless client connection quality?

Downstream link rate, the connection rate for the AP to the client

The receive signal strength (RSS) of the client at the AP

Upstream link rate, the connection rate for the client to the AP

The channel utilization of the channel the client is using

NO.38 How are wireless clients assigned to a dynamic VLAN configured for hash mode?

Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN

Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs

Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool

Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of

NO.39 When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)

81 Tunnel-Private-Group-ID

65 Tunnel-Medium-Type

83 Tunnel-Preference

58 Egress-VLAN-Name

64 Tunnel-Type

NO.40 You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?

Enable Locate WiFi clients when not connected in the relevant AP profiles.

Enable Monitor channel utilization on the relevant AP profiles.

Ensure that all allowed channels are enabled for the AP radios.

Enable Radio resource provisioning on the relevant AP profiles.

NSE6_FWF-6.4 Dumps Ensure Your Passing: https://www.real4dumps.com/NSE6_FWF-6.4_examcollection.html

NSE6_FWF-6.4 PDF Pass Leader, NSE6_FWF-6.4 Latest Real Test [Q16-Q40]

Leave a Reply Cancel reply

Related Posts

Quality FCP_FGT_AD-7.4 PDF Dumps – FCP_FGT_AD-7.4 Exam Questions [Q18-Q36]

The Most In-Demand Fortinet FCP_FCT_AD-7.2 Pass Guaranteed Quiz [Q16-Q31]

Fortinet Exam 2022 NSE5_FCT-6.2 Dumps Updated Questions UPDATED Jul-2022 [Q12-Q35]