Verified VNX100 &As – Provide VNX100 with Correct Answers [Q16-Q37]

Rate this post

Verified VNX100 Exam Dumps Q&As – Provide VNX100 with Correct Answers

Pass Your VNX100 Dumps Free Latest Versa Networks Practice Tests

Q16. Review the exhibit.

Referring to the gear icon shown in the exhibit, when would you select the gear icon for a VLAN in a template workflow?

when all the devices sharing this workflow template have the default VLAN on the vni-0/1 interface

when all the devices sharing this workflow template have the same VLAN on the vni-0/1 interface

when all the devices sharing this workflow template have different VLANs on the vni-0/1 interface

when all the devices sharing this workflow template have more than one VLAN on the vni-0/1 interface

Q17. Which statement describes a Versa Workflow?

A Versa Workflow is another name for a template in Versa Director.

A Versa Workflow can be used to configure routing policies on third-party devices.

A Versa Workflow is a process that creates or modifies an object in Versa Director.

A Versa Workflow is the process used to order services from Versa Networks.

Q18. You are asked to implement a third-party application server as a virtual machine on Versa CPE.
In this scenario, which template would you use to accomplish this task?

Stateful Firewall Template

Common Template

Application Steering Template

Service Chain Tempplate

Q19. Which two statements about Versa Secure Access (VSA) are true? (Choose two.)

The VSA gateway is always hosted in a public cloud.

LDAP can be used to authenticate remote secure access users.

VSA supports multi-factor authentication.

The VSA client does not support split tunneling.

Q20. When onboarding a CPE using ZTP, the device shows up in the unknown device list in the Versa Director Inventory.
In this scenario, what caused this problem?

The template workflow configuration does not have the correct serial number of the CPE defined.

A non-Versa-branded appliance is used as the CPE.

The device workflow configuration does not have the correct serial number of the CPE defined.

The CPE is installed as a virtual machine.

Q21. Which statement about site discovery in a Versa Secure SD-WAN solution is true?

When a new site is provisioned, the administrator must add the new site information to existing site configurations.

When a new site is provisioned, Versa Director notifies existing sites of the newly added site.

When a new site is provisioned, Versa Controller reconfigures existing sites with the new site details.

When a new site is provisioned, existing sites auto-discover the new site using MP-BGP.

Q22. Which statement about a Versa spoke-to-hub-only topology is true?

Spoke devices can send traffic to other spokes through the hub.

Spoke devices can send traffic to other spokes directly.

Spoke devices can send traffic to other spokes through the controller.

Spoke devices can send traffic only to networks behind the hub.

Q23. A device is being onboarded with two Internet interfaces. Direct Internet Access (DIA) needs to be configured.
In this scenario, which two statements are true? (Choose two.)

All underlay interfaces belong to the same VR instance.

Each underlay interface belongs to its own VR instance.

Both Internet interfaces can be selected for DIA in workflows.

Only one Internet interface can be selected for DIA in workflows.

Q24. A customer has a single Versa Analytics cluster deployed in a data center. The Versa Director and Versa Controller nodes are distributed between the data center and the disaster recovery sites. The data center goes down for one day.
In this scenario, which statement is true?

SD-WAN CPE live monitoring will be lost during the one-day downtime.

New SD-WAN CPE cannot be deployed during the one-day downtime.

Reachability between SD-WAN CPE will be lost during the one-day downtime.

Logging and reporting will be lost during the one-day downtime.

Q25. Which two statements about Versa SD-WAN live monitoring of Versa CPEs are true? (Choose two.)

Versa Analytics provide real-time monitoring capabilities for all services running in Versa CPE.

Versa Director provides real-time monitoring capabilities for all services running in Versa CPE.

Versa Analytics has built-in ping, traceroute, tcpdump, and speed test tools.

Versa Director has built-in ping, traceroute, tcpdump, and speed test tools.

Q26. Review the exhibit.
Which hub topology is shown in the exhibit?

spoke-to-spoke only

spoke-to-spoke via hub

spoke-to-spoke direct

spoke-hub-hub-spoke

Q27. A network operator wants to monitor a Versa CPE interface live data.
In this scenario, how would you accomplish this task?

using Versa Controller

using Versa Director

using Versa Analytics

using the Versa CPE GUI

Q28. An administrator tries to run a speed test from a branch’s Internet link to the Internet link of a remote site branch. However, the speed test fails.
In this scenario, what are two causes for the failure? (Choose two.)

The SLA path status between the branch sites over the Internet link is down.

The speed test module has not been activated.

The speed test server is not enabled on the remote site.

The speed test client is not enabled on the local site.

Q29. Versa CPEs support which three QoS functions? (Choose three.)

admission control

hierarchical queuing

egress policing

classification

ingress policing

Q30. Which three protocols are able to be configured using Versa Workflows? (Choose three.)

BGP

EIGRP

IS-IS

OSPF

Static

Q31. Which three statements about Versa head-end component deployment are true? (Choose three.)

The components can be deployed on a bare metal server.

The components can be deployed as a mix of bare metal and virtual machines.

The components can be deployed as virtual machines.

The components can be deployed as bare metal on non-x86 appliances.

Q32. The administrator has to change the IP address of the Internet WAN link from DHCP to Static. The device template under Workflows has been updated with this change, but the change is not reflected in the branch device configuration.
In this scenario, which two steps should you take to solve this problem? (Choose two.)

Commit the appliance configuration to the Device Template.

Commit the Device Template configuration to the appliance.

Update the controller’s configuration with the static IP address of the branch’s Internet WAN link.

Update the Device Bind Data in Workflows with the IP address and gateway of the Internet WAN link.

Q33. Which two statements about security zones in a Versa Secure SD-WAN solution are true? (Choose two.)

Security zones group interfaces into security domains.

Security zones provide segmentation of traffic.

Security zones separate routing information into separate routing tables.

Security zones hide interfaces from tenants in a multitenant environment.

Q34. Yesterday, several users notified the network administrator that network performance was poor. However, today the users are not experiencing any network problems.
In this scenario, which Versa component would help identify the issue?

Versa Director troubleshooting tools

Versa Analytics dashboards

Versa Controller logs

Versa Director monitoring dashboards

Q35. What are two node personalities in a Versa Analytics cluster? (Choose two.)

Controller

Analytics

Gateway

Q36. Which two methods are used to provision a Versa SD-WAN CPE? (Choose two.)

PXE boot provisioning

URL-based provisioning

Script-based provisioning

USB-based provisioning

Q37. Which two descriptions about CoS functions in a Versa branch are true? (Choose two.)

Remarking separates traffic based on Layer 3, Layer 4, and Layer 7 fields.

Classification alters the CoS fields in outgoing traffic.

Queuing defines the priority of traffic and weights.

Scheduling controls the order of packets sent.

Get Top-Rated Versa Networks VNX100 Exam Dumps Now: https://www.real4dumps.com/VNX100_examcollection.html

Verified VNX100 &As – Provide VNX100 with Correct Answers [Q16-Q37]

Leave a Reply Cancel reply