Get 100% Authentic HP HPE6-A69 Dumps with Correct Answers [Q33-Q56]

Rate this post

Get 100% Authentic HP HPE6-A69 Dumps with Correct Answers

New Training Course HPE6-A69 Tutorial Preparation Guide

NEW QUESTION 33
A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing.

With the ports set up as routed ports, and default parameters for OSPF, which action is the simplest way to allow the fastest communication…

Utilize Equal-cost multi-path routing to aggregate more bandwidth on the WAN.

Set the OSPF cost parameters on every interface on every switch according to the Bandwidth or each link

No action is required

Set the OSPF reference bandwidth to 10 or higher

NEW QUESTION 34
(Scenarios may contain multiple errors which may or may not impact the solution) Refer to the Exhibit.

An engineer has attempted to configure two pairs of switches m the referenced configuration it Is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows

The configuration includes:

There is an error message stating “mismatched group speed” What should you add to the configuration to correct the error?

“system Interface-group 1 speed I0g”

“allow-unsupported-transceiver

“speed 10-full” under interfaces 1/1/12 and 1/1/13

“speed 40-full” under interfaces 1/1/49 and 1/1/50

NEW QUESTION 35
The customer is implementing new ArubaOS-CX 6300 switches into an environment that has third-party switches and uses centralized authentication from Microsoft Active Directory and TACACS* servers What would be a valid configuration requirement for ArubaOS-CX switches for centralized user authentication?

Importing a TACACS server certificate for TLS authentication into the switch

Defining a TACACS server group for authentication in the switch configuration

Enabling the active directory VSA in the switch for radius authentication

Using a PAM extension for LDAP authentication with Active Directory Server.

NEW QUESTION 36
Which MAC address is valid for use as a VSX System-MAC address?

AB:00:04:00:FF:00

0A:00:00.00.00

FF:00:00:00:00:00

01:00:5E40:10.01

NEW QUESTION 37
You are working with a customer whos has a paw of Aruba 8325 switches configured for Multi-Chassis Link Aggregation The customer is complaining that users are experiencing intermittent packet drops. Which action should be taken to quickly aid you in identifying the cause?

Enable debug of vri with “console” set as the destination

Setup a mirror session to generate a Tshark file.

Setup a mirror session to niter packets for TCPDUMP analysis

Check the configured VLANs using “show vsx config-consistency”

NEW QUESTION 38
How Is voice Traffic prioritized correctly on ArubaOS-CX switches?

By placing it in the strict priority queue

By defining voice VLANs inside VLAN context

By attaching the QoS settings directly to device profiles

By implementing TOS-profiles

NEW QUESTION 39
A client connected to Aruba CX 6300 on Port vt/2 Is having issues connecting to a remote destination 10 100
10 62 port 443. How should you get session-specific diagnostic information about this connection?

Use diag utilities tcpdump desttnation-ip 10 10010.62 to capture the session

Use diag utilities tcpdump destination-prefix 10 100 10.62/32 to capture the session

Run tcpdump -interface “1/1/2” host 10.100 10.62 to capture the session

Enter diag-mode and execute tcpdump ip.addr==10.100.10.62.

NEW QUESTION 40
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address.
What are the minimum steps that should be performed to mitigate this condition? (Select two)

Implement arp ACLs to define trusted MAC address to IP bindings

Enable ‘arp inspection’ on the end-user physical ports

Enable ‘arp inspections on the end-user VLAN.

Implement dhcpv4-snooping

Enable ‘arp inspection untrusted on the end-user physical pons

NEW QUESTION 41
A customer would like to utilize some ArubaOS-CX 6300M switches to perform OSPF routing.

All ports are routed, and ECMP is enabled, with other default parameters for OSPF. What will be the result of traffic sent from CLIENT-A to CUENT-B?

Traffic will be SW3 -> SW-4 -> SW-2.

Traffic win be SW3 -> SW-1 -> sw-2.

Traffic will be SW3 -> SW-1 -> sw-4 -> SW-2

Traffic will be SW3 -> SW-1 -> Sw-2 & SW3 -> SW-4 -> SW-2

NEW QUESTION 42
When planning a new wired network solution for an organization, mere are technical goals that must be achieved to support the organization objectives and their applications and services.
Which options are valid technical goals? (Select two.)

Reduce the cost of wiring.

Transform the process of acquisition of a new network solution from a CAPEX to an OPEX model

improve the network throughput

Replace hardware that is reaching end of support with a technology refresh.

Accelerate the ordering process of new network hardware.

NEW QUESTION 43
Which statement is true about NAE scripts’?

The System Resource Monitor is the only script Installed on the system by default.

The System Resource Monitor and Health Monitor a/e the only scripts installed on the system by default

No script is installed on the system by default.

The Health Monitor is the only script installed on the system by default.

NEW QUESTION 44
(Scenarios may contain multiple errors which may or may not Impact the solution) Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration, it is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows:
There is an error message staling “incompatible interface.” Which interfaces are the cause of the error? (Select two.)

1/1/12 10GBaseT SFP*+ 30m Cat6A Transceiver

1/1/49 40G QSFP+ 15m Active Optical Cable

1/1/13 10GBaseT SFP+ 30m Cat6A Transceiver

1/1/48 iGBaseT 100m Cat5e Transceiver

1/1/50 40G QSFP+ 15m Active Optical Cable

NEW QUESTION 45
A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings.
VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 46
Refer to the exhibit.

Which statement is true?

Q1 and S1 are applied to all interfaces mat do not have a QoS override applied

To be effective, both Q1 and S1 still need to be applied to Interfaces

No default queues are changed

Q1 and S1 are applied to all interfaces.

NEW QUESTION 47
The customer is already using Aruba Gateway and third-party L2 switches New ArubaOS CX 6300 switches have been deployed for R&D. which have a requirement for user profiling and tunneled traffic between ArubaOS CX 6300 and Aruba Gateway What is required for this configuration to apply QoS user-based rules for the R&D client traffic?

Apply a QoS rule to the ArubaCX 6300 client port, lo classify traffic before it is tunneled.

Apply a port-access policy with QoS defined in the user role on the ArubaOS CX6300 switch

Manually prioritize IP protocol 47 traffic on the third-party switches to prioritize the tunneled traffic

Create a QoS policy for the UBT-client-VLAN traffic on the third-party switch.

NEW QUESTION 48
Match the BGP path selection criteria attributes (Each option may be used once, more than once, or not at all)

NEW QUESTION 49
(Scenarios may contain multiple errors which may or may not Impact the solution > Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration it is required to implement VSX keep-alive at the aggregation layer.
The ports of the ArubaOS-CS 8325 switches used for Agg01 and Agg02 are populated as follows:

The configuration of switch AGG01 includes:

VSX keep-alive is not working. Which modification should you make lo resolve the error condition?

Edit interface 1/1/48, adding the command “vpn-instance KA”

Modify the Interface lag 2 command, removing “multi-chassis”

Modify the Keepalive peer 192.168.20.2 source 192 168.20.1 command, adding “vrf KA”

Edit the vsx-sync command, adding “keep-alive”

NEW QUESTION 50
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address What are the minimum steps that should be performed to mitigate this condition? (Select two.)

implement dhcpv4-shooping.

Implement ARP ACLs to define trusted MAC address to IP bindings

Enable ‘arp inspection’ on the end-user physical ports

Enable ‘arp inspection untrusted’ on the end-user physical ports

Enable ‘arp inspection’ on the end-user VLAN

NEW QUESTION 51
The customer is currently planning the migration of their current switches from the existing Aruba 5400R to ArubaOS-CX 6400. Which statements are correct about the mitigation of rogue DHCP servers with the selected product? (Select two )

With Aruba CX 6400 configure dhcp-snooping for the selected VLANs with authorized servers

DHCP snooping can be enabled on ArubaOS-CX switches, once it’s disabled on ArubaOS switches for same VLANs

DHCP snooping is supported on both IPv4 and IPv6

DHCP snooping needs to be enabled per VRF basis on Aruba CX 6400

NEW QUESTION 52
The customer has a requirement for creating security filtering for IPv4 and IPv6 traffic passing through an ArubaOS-CX 6400 switch. Which statement Is true about access-list on the selected switch model?

IPv4 and IPv6 entries can be used in one ACL with separate rules

Separate IPv4 and IPv6 ACLs need to be created for inbound and outbound traffic

Only one inbound or outbound ACL can be bound to an interface.

Routed interfaces can have only inbound ACLs

NEW QUESTION 53
Match the repotted status to the Aruba 8325 issue (Each option may Be used once more than once, or not at all)

NEW QUESTION 54
Refer to the exhibit.

A customer has implemented this ArubaOS-CX solution. NetEdit is not present. After a while, the secondary node of the VSX-cluster fails. What is the correct procedure to replace the failed node as quickly as possible?

Replace the failed unit, boot up the new node without connecting cables, upgrade firmware and configure as secondary vsx node connect iSl and wart for VSX to synchronize After successful recovery, reconnect the remaining cables.

Replace the failed unit, boot up the new node without connecting cables, upgrade firmware, and restore and save config Shutdown all ports, reconnect the correct cables, and enable all ports

Replace the failed unit, connect the correct cables, boot up the new node in recovery mode, upgrade firmware and restore, and save config Then, reboot and wait for VSX to synchronize.

Replace the failed unit, connect the correct cables, boot up the new node and wait for VSX to synchronize configuration and firmware.

NEW QUESTION 55
When applying me following access-Iist to an ArubaOS-CX 6300 switch:

How does this ACL behave on the selected switch? (Select two.)

The mp traffic to MANAGEMENT-SERVERS group is logged to me event logs

The tftp traffic to MANAGEMENT-SERVERS group is not logged to the event logs.

The snmp-trap traffic to MANAGEMENT-SERVERS is logged to the event togs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is logged to event logs.

The denied tcp traffic to the MANAGEMENT-SERVERS group is not logged to event logs

NEW QUESTION 56
An administrator warns to start a REST API session with an Aruba-OS CX switch Which HTTP method should the Administrator use to start a session?

PUT

GET

POST

Dumps of HPE6-A69 Cover all the requirements of the Real Exam: https://www.real4dumps.com/HPE6-A69_examcollection.html

Get 100% Authentic HP HPE6-A69 Dumps with Correct Answers [Q33-Q56]

Leave a Reply Cancel reply

Related Posts

HPE6-A72 Questions Pass on Your First Attempt Dumps for Aruba Certified Switching Associate (ACSA) V1 Certified [Q11-Q29]

[2022] Valid HPE6-A71 test answers & HP HPE6-A71 exam pdf [Q98-Q122]

[Dec 04, 2022] HPE1-H01 Exam Brain Dumps – Study Notes and Theory [Q21-Q35]