Oracle 1z0-1032-22 Exam Preparation Guide and PDF Download [Q41-Q56]

Rate this post

Oracle 1z0-1032-22 Exam Preparation Guide and PDF Download

Verified & Correct 1z0-1032-22 Practice Test Reliable Source May 10, 2023 Updated

Oracle 1z0-1032-22 Exam Syllabus Topics:

Topic	Details
Topic 1	Create and manage Contact Lists, Supplemental Tables, and Profile Extension Tables Create and Configure Responsys Users
Topic 2	Describe Responsys API Authentication Perform IP Warm Up and IP Ramp Up Create, manage, and test campaigns
Topic 3	Create and manage Filters, Segment Groups, and Seed Groups Create Short Message Service (SMS) campaigns
Topic 4	Describe domain branding and domain delegation, and gather initial account settings Describe the Responsys Data Model
Topic 5	Use Monitor Campaign Functionality Configure Connect jobs to import data
Topic 6	Responsys Personalization Language (RPL) Read, write, and edit HTML code for emails
Topic 7	Analyze using Deliverability Analysis Configure subscription management

NO.41 An SSH2 key pair can be created to be used for authentication to establish a secure connection between your server and the Oracle file server.
Which key from the client key pair must you send to Responsys?

Private

Public

Secure

Master

NO.42 You uploaded into the Responsys Content Library an HTML document and three subdocuments personalized with the member level of the subscriber. When you validate the campaign, you get this error: “Email Message preview failed because of template execution runtime error, detailed error: property MEMBER_LEVEL for datasource CONTACTS is not defined in the datasources.” How should you correct this error?

Open each HTML document in the package and declare the MEMBER_LEVEL field by using the RPL directive<#field> in every document. Then reupload the documents into the Content Library.

You did not select the MEMBER_LEVEL column from the CONTACTS database. In the Datasources Section in the Campaign workbook, select the MEMBER_LEVEL field and make sure the alias matches what is in the HTML code. Responsys will now be able to insert values for that column at run time.

The MEMBER_LEVEL field is a Responsys reserved word and cannot be used for personalization.

The HTML coder didn’t include the <#data> directive and declare the CONTACTS data source in each document. Enter this into each document, and the error should now be resolved.

NO.43 Which statement is true about how you must configure a Responsys Profile list so you can begin sending Mobile SMS campaigns?

You only need to define the COUNTRY_ code if you are sending SMS messages to subscribers outside of the default country setting for your account.

You can only modify profile lists used for mobile campaigns through Connect uploads.

You can use the same Profile list for mobile campaigns that you are currently using for email campaigns.

All the data that you need to use to personalize mobile messages must be stored as columns in the Profile list.

NO.44 Which statement describes the requirements to set up a Responsys primary data gateway solution for the secure transferring of data?

The Responsys Data Gateway consists of only an API layer, using AuthO authentication to transfer data.

The Responsys Data Gateway consists of a dedicated database server that can be accessed securely using a VPN setup specifically for a client account.

To install the Responsys Data Gateway, you provide each client an encryption appliance that is configured to directly connect to their Responsys database instance. All data transfer occurs through the appliance.

The Responsys Data Gateway requires a dedicated SFTP account that is accessed via a secure shell (SSH2) protocol. A customer must provide a public SSH2 key for authentication.

NO.45 Your client wants to ensure that their Event Data Feeds are secure while the files are stored on the server.
What step should you take to encrypt the files?

Import a private encryption key the customer created to be used when the export runs.

Import a public encryption key the customer created to be used when the export runs.

Create new credentials specifically for the export job that no one knows and that passes the Responsys password integrity checker.

Create a Responsys security key in the Account Administration screen. Import this key when creating the export.

NO.46 You’re creating an Opt-In form for your client. After a new customer submits the subscription form, you want to wait for 24 hours and then send them a follow-up email with a discount offer.
How should you create a form rule to accomplish this?

Create a form rule to trigger a custom event. Set up a program to listen for this customer event, wait for 24 hours, then send the follow-up email offer.

Create a form rule that directs the new customer to a URL so they can enter their email address and request the discount coupon.

Create a form rule to populate a table with the submitted data, then schedule a campaign 24 hours later to send all newly entered subscribers the follow-up email.

Create a form rule that schedules a transactional email campaign with the offer 24 hours after each form submission.

Create a form rule to trigger a follow-up email message to the form submitter. In the form rule, specify a 24-hour delay before sending the email.

NO.47 A published campaign has an issue that has halted campaign launches. Because of this issue, email notifications were sent to all the key stake holders regarding the failures. You have been contacted to figure out exactly what the issue is, report the issue and if possible fix it.
How should you locate the campaign that is facing this issue?

Use the Campaign Search feature.

Use the Manage Campaign screen.

Use the Campaign Debugger tool.

Look in each folder until you find the campaign.

NO.48 You are tasked with creating a new campaign using Email Message Designer and RPL. You developed HTML and RPL code.
What are the next steps to create a campaign using the code as a base for the campaign in Responsys?

Navigate to Campaign > Create Mobile SMS Campaign. Enter the campaign name and information. Then, paste the code into EMD and validate.

Navigate to Campaign > Create Classic Email Campaign. Enter the campaign name and information. Then, paste the code into EMD and validate.

Navigate to Campaign > Create Email Campaign. Enter the campaign name and information. Then, paste the code into EMD and validate.

Navigate to Campaign > EMD Campaign. Enter the campaign name and information. Then, paste the code into EMD and validate.

NO.49 One of the top ISPs is blocking promotional emails coming from your domain. This has not happened before. You check the deliverability metrics on Responsys reports for the email campaigns sent in the last two weeks.
What are two reasons why this is happening? (Choose two.)

Hard bounce rates are 10% or higher.

Recipients are forwarding your emails to everyone in their address books.

Your open rates have dropped somewhat since last month.

The ISP is recording a high number of spam trap hits and complaint rates from recipients.

Substantial (5%) increase in click-through rates on last week’s promotional campaign.

NO.50 Your client’s email analyst advises you that recent reports show an increased soft-bounce rate of 6% for emails launched in the last 30 days. The analyst is worried about being flagged as having a bad reputation by some ISPs and wants you to suppress sending to soft-bounced addresses for the next 30 days.
Which option should you use to handle the soft-bounce problem?

Take the latest CED report to locate all soft-bounced addresses. Run a Connect job to change the DELIVERABILITY_STATUS_ field to U for those addresses so that messages will no longer be sent to that email address.

Create a filter of all soft-bounced addresses for the last three email launches, save it as a PET, and use that as a suppression table for all email campaigns for the month.

When defining audiences for the next month, add criteria in Filter Designer to suppress all email addresses that have soft bounced in the last 30 days.

Manually change the DEVERABILITY_STATUS_ field to Undeliverable for any email that soft bounces.

NO.51 What happens when you send a Responsys campaign and the ISP returns a “Hard Bounce” error to the sender?

A hard bounce of an email message will cause the record to be logged in to the Hard Bounced table, and you must select that list as a suppression list in future message launches to ensure that you do not send to that address again.

A hard bounce of an email message will cause the record to be flagged as Hard Bounced in an Insight Report, and you can run a list cleanse process to remove it from your list.

A hard bounce of an email message will delete the contact record from the Profile List to ensure that messages will no longer be sent to that address.

A hard bounce of an email message will set the EMAIL_DELIVERABILITY_ STATUS_ field to Undeliverable and messages will no longer be sent to that address.

NO.52 In RPL, how do you reference a value in a data source?

data_source.field_name

fieldname

project_name.field_name

data_source_alias.filed_name_alias

NO.53 You have received requirements to create Connect Event Data Feed exports for two different integration projects. The client wishes to create two CED feeds, both including the Sent feed.
What should you do?

Create the two separate exports and ensure they both have the Sent value in them.

Create the two separate exports and use the Sent value for one export and the SentX value for the second export.

Go back to the team that developed the requirements and tell them that the Sent feed can only be used in one actively scheduled Connect export job at one time. Determine if the same Sent feed can be sent to different file locations.

Go back to the team that developed the requirements and see if you can schedule the exports on different days. Responsys will allow the use of the same Sent value to be used in two different active exports if they are scheduled for different days of the week.

NO.54 For the email campaign you are designing in EMD, the first line of the HTML creative must include the first name of the subscriber. The first name attribute is FNAME and is located in the profile list that is called CONTACTS.
Which option displays the correct RPL syntax?

$CONTACTS.FNAME

#FNAME. CONTACTS

$ {CONTACTS.FNAME}

FNAME ($CONTACTS)

NO.55 After implementing and launching a campaign, you want to watch real-time opens and clicks in order to give a quick report to the executive management.
Where should you retrieve these results and what step should you take to provide the management with the reporting information?

In the Campaign Workbook, in the Campaign Setting section, select the Edit active links for this launch link and copy the URL and then provide it to the management.

In the Campaign Workbook, use the Analyze Deliverability functionality. Select the Edit active links for this launch link and copy the URL and provide it to the management.

In the Program Designer, using the Analyze Report feature. Select the Edit active links for this launch link and copy the URL and provide it to the management.

View a Live Report for the campaign. Click the Generate Distributable Live Report URL. Provide the URL to the management to facilitate access to the Live Report.

NO.56 While configuring the import of a PET table, you need to match new records to existing records for the data merge.
Which two profile fields are options to configure the import to match existing records? (Choose two.)

PET_ID_

EMAIL_ADDRESS_

CUSTOMER_ID_

ADDRESS_

Pass Oracle 1z0-1032-22 exam Dumps 100 Pass Guarantee With Latest Demo: https://www.real4dumps.com/1z0-1032-22_examcollection.html

Oracle 1z0-1032-22 Exam Preparation Guide and PDF Download [Q41-Q56]

Oracle 1z0-1032-22 Exam Syllabus Topics:

Leave a Reply Cancel reply

Related Posts

Dec-2023 Oracle 1z0-1096-23 Certification Real 2023 Mock Exam [Q18-Q32]

GET Real Oracle 1Z0-902 Exam Questions With 100% Refund Guarantee Mar 06, 2024 [Q35-Q49]

1z0-1053-22 Study Guide Brilliant 1z0-1053-22 Exam Dumps PDF [Q35-Q56]