[Jul-2022] 700-905 Exam Questions and Valid 700-905 Dumps PDF [Q30-Q53]

Rate this post

[Jul-2022] 700-905 Exam Questions and Valid 700-905 Dumps PDF

700-905 Brain Dump: A Study Guide with Tips & Tricks for passing Exam

NO.30 HyperFlex virtual servers differ from regular servers in which two key areas? (Choose two.)

NVMe: Regular servers do not support NVMe drives for high availability.

No RAID is required to consolidate disks into a shared data platform.

CVM: Virtual appliance, which performs reading/writing, caching, deduplication, and compression.

SP: UCS Service Profiles are used to delineate MAC address pools from upstream networks.

CCC: Cisco Cloud Center is used for multi-cloud integration and seamless deployment.

NO.31 Which two steps should be performed before installing HyperFlex? (Choose two.)

Determine and download recommended hypervisor

Determine and download recommended VCenter required

Download service profile templates

Determine and download recommended UCS firmware required.

Determine and download virtual machine OS’ required.

NO.32 Which two ways does Cisco HyperFlex upgrade the traditional RAID? (Choose two.)

HyperFlex enables stretched RAID arrays spanning multiple geographic sites.

Hardware replacement initiates self-healing with minimal impact

Limiting the number of drives locally, which are not a part of the shared datastore.

Distributing data locally, not just across the hosts in HyperFlex cluster

Eliminating the need for additional hardware cards, while maintaining high performance.

NO.33 How can the maximum 10 performance be achieved?

Use the HX 240 with all SAS drives

Use the HX 240 with all flash drives

Use the HX 220 with all flash drives

Use the HX 220 with all SAS drives

NO.34 When cabling a given HX node to the Fabric Interconnect which three actions are required?
(Choose three.)

Connect the node to different port numbers on each of the two Fabric Interconnects.

Connect port 1 on the VIC to Fabric Interconnect A.

Connect server port L1 to Fabric Interconnect port L1.

Connect the node to the same port number on each of the two Fabric Interconnects.

Connect server port L2 to Fabric Interconnect port L2

Connect port 2 on the VIC to Interconnect B

NO.35 The process of optimizing information is tightly tied to the writing process as it is performed inline as the
writing process is being performed The process of data optimization is performed with which two processes?
(Choose two)

The primary CVM compresses the data, writes it to its cache drive and mirrors it

ACK is sent to the CVM that the write is about to be initiated

On write, the local lOVisor sends the write to the primary CVM for that block

On read/Write. the distributed VAAI sends the write to the primary CVM for that block

The secondary CVM compresses the data, reads it from its cache drive and mirrors it

NO.36 In all HX server types, where are capacity drives installed?

side

top

back

front

NO.37 Which two processes does failure on a node initiate? (Choose two.)

Distributed pooled data is migrated off nodes to master data store.

Affected node is marked as unhealthy and placed into standby mode

A call-home process is initiated and the failure is reported to TAC

The VMs on the failed node are moved to another node by vSphere high availability

The system is marked unhealthy but remains operational.

NO.38 HyperFlex compute nodes contribute what percentage of the overall disk storage capacity?

20%

10%

NO.39 Which two processes does failure on a node initiate? (Choose two.)

Distributed pooled data is migrated off nodes to master data store.

Affected node is marked as unhealthy and placed into standby mode

A call-home process is initiated and the failure is reported to TAC

The VMs on the failed node are moved to another node by vSphere high availability

The system is marked unhealthy but remains operational.

NO.40 Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)

Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the
Level 4 read-back cache

Write-back (default): Only write information and most commonly used information are deposited in the
cache

Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI
performance

No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs

Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs

Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI
performance

NO.41 How many DIMMs are supported per memory channel in the Cisco UCS M5 server?

NO.42 There are often disadvantages when using mixed hardware, and uniform systems are highly advised. What are three disadvantages of using validated yet mixed hardware? (Choose three.)

“Hardware only” solutions require less latency for data aggregation.

“Software only” solutions are inherently more secure, adhering to government regulations.

“Software only” HCI solutions often mean that HCI vendors do not have control over the hardware that the consumer is using. The lack of control over the hardware can result in hardware not being security-compliant (usually the case with white box solutions) or not being optimally configured for the given HCI solution.

Validated yet “mixed” hardware systems may be supported by the specific original equipment manufacturers but software vendors require a master level services agreement.

“Software only” solutions can result in a lack of simplicity for installation and maintenance. While setup and maintenance of an HCI solution might be simple you still need to configure and maintain the hardware part, which is not orchestrated by the HCI solution.

Validated hardware does not mean smooth performance, which particularly applies to hardware that is seldom chosen for the hardware part of the “software only” solution.

NO.43 Which version of HXDP was the first to support multiple VICs on a single server?

HXDP 3.5.1

HXDP 3.0

HXDP 4.0

HXDP 3.5

NO.44 Which two components are automatically configured from the information provided to the HyperFlex
installer? (Choose two )

the network

operating system deployment preparation

controller VM configuration

application dependencies

server firmware policy

NO.45 Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)

Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the Level 4 read-back cache

Write-back (default): Only write information and most commonly used information are deposited in the cache

Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI performance

No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs

Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs

Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI performance

NO.46 Which two features enable RAID cards striping as well as mirroring and parity? (Choose two.)

Integration with Cisco Intersight for a cloud-based storage management solution.

No load on the system resources, drives seem as one drive to the operating system

On RAID card failure, the RAID onboard concurrent cache assists rebuild cache.

Hot replacement of drives available, depending on configuration

Distributed drives across disparate systems can be in RAID together.

NO.47 How many PCIe standards-compliant interfaces do Cisco VICs support?

512

128

256

NO.48 Which three additional management tools are included in HXDP to configure HyperFlex clusters? (Choose
three.)

UCS Manager

Storage CLI

Data Center Network Manager

Cisco IMC 13

REST API

HyperFlex Connect

NO.49 Which two steps should be performed before installing HyperFlex? (Choose two.)

Determine and download recommended installer OVA version required

Complete the pre-installation checklist.

Determine and download recommended hypervisor

Download service profile templates

Determine and download virtual machine OS! required

NO.50 Which two components are automatically configured from the information provided to the HyperFlex installer? (Choose two )

the network

operating system deployment preparation

controller VM configuration

application dependencies

server firmware policy

NO.51 When local writing or reading is performed, the lOVisor intercepts the read/write requests and forwards them to CVMs across the cluster This action allows non-local CVMs to be aware of the input/output requests so that they can perform the appropriate input/output action lOVisor provides which two additional functionalities? (Choose two.)

provides redundancy when local CVM fails, offloading data processing to another CVM in the cluster

when an lOVisor fails, the CVM remains active and functional, which enables uninterrupted operation of the system by forwarding 10 to another available lOVisor In the HyperFlex cluster

enables asynchronous replication of data across individual HyperFlex nodes with sub-second re- convergence

integration point for deployment of cloud-based SaaS offerings from eco-system partners

intercepts local virtual machines’ reads and writes and distributes them across the network eliminating hotspots

NO.52 How much memory is reserved for the controller VM in the HX220c?

48 GB

12 GB

24 GB

78 GB

NO.53 How many PCIe standards-compliant interfaces do Cisco VICs support?

512

128

256

700-905 Exam Questions: Free PDF Download Recently Updated Questions: https://www.real4dumps.com/700-905_examcollection.html

[Jul-2022] 700-905 Exam Questions and Valid 700-905 Dumps PDF [Q30-Q53]

Leave a Reply Cancel reply

Related Posts

The Best Practice Test Preparation for the 700-150 Certification Exam [Q70-Q91]

[Dec 14, 2023] Real4dumps 300-410 Exam Practice Test Questions (Updated 563 Questions) [Q251-Q266]

[Q183-Q202] Free Sample Questions to Practice 350-501 Certification Test Engine [Jan-2024]