Last NS0-516 practice test reviews Practice Test Network Appliance dumps [Q28-Q46]

Rate this post

Last NS0-516 practice test reviews: Practice Test Network Appliance dumps

Try NS0-516 Free Now! Real Exam Question Answers Updated [Dec 08, 2024]

The NS0-516 certification exam is a challenging exam that requires a solid understanding of data storage systems and NetApp’s E-Series SAN solutions. Candidates must have a deep understanding of storage system architecture, configuration, and management. They must also be able to troubleshoot complex storage system issues and resolve them quickly and efficiently.

Q28. Witch function does the SANtricity Enterprise Management Window (EMW) provide? (Choose the best answer.)

a device discovery option for storage systems to be managed

a multipath I/O driver

volume reconstruction progress updates

a Manage Host Port Identifiers dialog box

a configuration interface for creating disk pools and volume groups

Q29. You help a customer diagnose a performance issue on an E-Series storage system. You decide to measure the amount of data that is being handled over the span of an hour.
In this scenario, what are you measuring?

I/O alignment

parity

throughput

IOPS

Q30. Which two actions must be performed to enable iSCSI multipathing on Windows for NetApp E-Series systems? (Choose two.)

Set up iSCSI IP addresses on the E-Series system and the Windows host

Install the Host Utilities on the Windows host

Create two VSANs on the iSCSI switches

Install a Host Channel Adapter (HCA) on the Windows host

* iSCSI Multipathing: Enables multiple paths for data to travel between the host and storage, providing redundancy and increased performance.
* Steps to Enable:
* iSCSI IP Setup: Configure IP addresses for the iSCSI interfaces on both the E-Series system and the Windows host to ensure proper network communication.
* Host Utilities: Install NetApp E-Series Host Utilities on the Windows host to provide the necessary drivers and multipathing software.
References: NetApp E-Series SANtricity Software and Windows Host Utilities Installation and Configuration Guide.

Q31. A Snapshot group contains one repository for which associated objects?

Snapshot images

Consistency groups

Snapshot volumes

Base volume files

Q32. All non-I/O related activity on the storage system is recorded in the _____________. (Choose the best answer.)

Storage Array Profile

Event Log

Cache backup device

NVSRAM

DACstore

Q33. How many paths provide optimal redundancy from a host through a switched topology to a storage system?

Q34. Which data protection strategy has the most overhead capacity as a percentage of the total capacity?

Dynamic Disk Pools (DDP)

RAID 6

RAID 5

RAID 10

Q35. Which native GUI switch tool is used to manage Brocade switches and directors?

SAN Manager

Enterprise Fabric Services

Device Manager

Web Tools

Q36. What is a NetApp best practice recommendation for the system monitor?

It should be stopped during a controller firmware upgrade.

It should run only on one management server connected to the storage system.

It should run on all storage manager clients.

It should run only on Windows server systems.

Q37. Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two.)

Test SSO login

Configure In-Band Management

Map roles

Configure LDAP

Q38. A company is using the Federal Information Processing Standard (FIPS) on all volume groups. However, one volume group failed a security audit.
In this scenario what would cause a volume group to fail the security audit?

An FDE drive was added as a spare in the volume group

Data Assurance was changed to “disabled” for the volume group

The Secure Erase operation was applied to the volume group disks

Connectivity to the key server was interrupted

Q39. A junior administrator recently made changes to an E-Series system. As a result of these changes, the management host lost the ability to manage the E-Series system through in-band management, but the host still has access to the E-Series data volumes.
In this scenario, what caused this issue?

The access volume was un-mapped

The management IPs were changed

The ownership of the management host’s volumes changed

Auto Load Balancing was disabled

Q40. Which two actions must be performed to enable iSCSI multipathing on Windows for NetApp E-Series systems? (Choose two.)

Set up iSCSI IP addresses on the E-Series system and the Windows host

Install the Host Utilities on the Windows host

Create two VSANs on the iSCSI switches

Install a Host Channel Adapter (HCA) on the Windows host

Q41. Which feature creates a full physical clone of a volume on an E-Series or EF-Series storage system?

Snapshot volume

Snapshot image

Volume Copy

FlexClone

Q42. Is this E5624 storage system cabled according to recommended practices? If not, why?

Yes. The cabling configuration is correct.

No. The controllers should be cabled to the last disk shelf first.

No. Each controller is only cabled to one set of ESMs in the disk shelves.

No. Controller A should be cabled to the right ESMs, instead of the left ESMs and Controller B should be cabled to the left ESMs instead of the right ESMs.

Q43. According to NetApp recommended practices, is this E2712 storage system cabled for a dual-stack configuration? If not, why?

No. The cabling to the disk shelves is coming from the host ports.

No. The controllers are only cabled to one “stack.”

No. The cabling has split the top-down-bottom-up configuration.

Yes. The cabling configuration is correct.

Q44. A customer needs a system for a new solution that they are designing. They have provided you with the performance and capacity requirements.
In the NetApp Fusion UI, which workflow should you perform to help the customer?

Design a System Manually

Modify Existing Storage

Size and Recommend

Perform a Tech Refresh

Q45. What file on a Windows management host server contains information about the storage system management connections?

EMWdata_vxx.bin

AMWcfg_vxx.bin

mgmt.cfg

the event log

Q46. An orphaned volume occurs during an asynchronous mirror implementation. You must recover the orphaned volume.
In this scenario, which statement is correct?

Deactive the mirror consistency group that contains the orphan then re-enable the group

Perform a role change on the orphan then re-create the mirroring relationship

Remove the mirroring relationship on the orphan then re-create the mirroring relationship

Suspend mirroring operations on the orphan then resume operations

Loading …

Get Ready to Pass the NS0-516 exam with Network Appliance Latest Practice Exam : https://www.real4dumps.com/NS0-516_examcollection.html

Last NS0-516 practice test reviews Practice Test Network Appliance dumps [Q28-Q46]

Leave a Reply Cancel reply

Related Posts

Network Appliance NS0-603 Deluxe Study Guide with Online Test Engine [Q26-Q48]

The Best Network Appliance NS0-520 Study Guides and Dumps of 2024 [Q123-Q142]

[Jan-2023] Dumps Brief Outline Of The NS0-003 Exam – Real4dumps [Q19-Q34]