The Fortinet NSE5_FMG-7.0 Questions & Practice Test are Available On-Demand [Q42-Q65]

4.3/5 - (6 votes)

The Fortinet NSE5_FMG-7.0 Questions & Practice Test are Available On-Demand

Valid NSE5_FMG-7.0 Exam Dumps Ensure you a HIGH SCORE

To prepare for the Fortinet NSE5_FMG-7.0 certification exam, candidates can take advantage of a variety of resources, including training courses, study guides, and practice exams. These resources can help candidates develop the knowledge and skills needed to pass the exam and demonstrate their expertise in managing and configuring Fortinet security solutions.

NO.42 Which of the following statements are true regarding schedule backup of FortiManager? (Choose two.)

Backs up all devices and the FortiGuard database.

Does not back up firmware images saved on FortiManager

Supports FTP, SCP, and SFTP

Can be configured from the CLI and GUI

NO.43 View the following exhibit.

Which of the following statements are true based on this configuration setting? (Choose two.)

This setting will enable the ADOMs feature on FortiManager.

This setting is applied globally to all ADOMs.

This setting will allow assigning different VDOMs from the same FortiGate to different ADOMs.

This setting will allow automatic updates to the policy package configuration for a managed device.

NO.44 Refer to the exhibit.

An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

192.168.0.1/24

10.200.1.0/24

It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.

Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.

NO.45 View the following exhibit.

Given the configurations shown in the exhibit, what can you conclude from the installation targets in the Install On column?

The Install On column value represents successful installation on the managed devices

Policy seq#3 will be installed on all managed devices and VDOMs that are listed under Installation Targets

Policy seq#3 will be installed on the Trainer[NAT] VDOM only

Policy seq#3 will be not installed on any managed device

NO.46 Refer to the exhibit.

Which two statements are true if the script is executed using the Device Database option? (Choose two.)

You must install these changes using the Install Wizard to a managed device

The successful execution of a script on the Device Database will create a new revision history

The script history will show successful installation of the script on the remote FortiGate

The Device Settings Status will be tagged as Modified

NO.47 An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?

Make sure FortiManager Access is enabled in the administrator profile

Make sure Offline Mode is disabled

Make sure the administrator IP address is part of the trusted hosts.

Make sure ADOMs are enabled and the administrator has access to the Global ADOM

NO.48 An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?

By a dollar symbol ($) at the end of the device name

By an at symbol (@) at the end of the device name

By a Question NO : mark(?) at the end of the device name

By an Asterisk (*) at the end of the device name

NO.49 An administrator has enabled Service Access on FortiManager.
What is the purpose of Service Access on the FortiManager interface?

Allows FortiManager to download IPS packages

Allows FortiManager to respond to request for FortiGuard services from FortiGate devices

Allows FortiManager to run real-time debugs on the managed devices

Allows FortiManager to automatically configure a default route

NO.50 An administrator run the reload failure command: diagnose test deploymanager reload config
<deviceid> on FortiManager. What does this command do?

It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.

It installs the latest configuration on the specified FortiGate and update the revision history database.

It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.

It installs the provisioning template configuration on the specified FortiGate.

NO.51 View the following exhibit.

If both FortiManager and FortiGate are behind the NAT devices, what are the two expected results? (Choose two.)

FortiGate is discovered by FortiManager through the FortiGate NATed IP address.

FortiGate can announce itself to FortiManager only if the FortiManager IP address is configured on
FortiGate under central management.

During discovery, the FortiManager NATed IP address is not set by default on FortiGate.

If the FCFM tunnel is torn down, FortiManager will try to re-establish the FGFM tunnel.

NO.52 An administrator has assigned a global policy package to a new ADOM called ADOM1. What will happen if the administrator tries to create a new policy package in ADOM1?

When creating a new policy package, the administrator can select the option to assign the global policy package to the new policy package

When a new policy package is created, the administrator needs to reapply the global policy package to ADOM1.

When a new policy package is created, the administrator must assign the global policy package from the global ADOM.

When the new policy package is created, FortiManager automatically assigns the global policy package to the new policy package.

NO.53 An administrator is in the process of moving the system template profile between ADOMs by running the following command:
execute improfile import-profile ADOM2 3547 /tmp/myfile
Where does the administrator import the file from?

File system

ADOM1

ADOM2 object database

ADOM2

NO.54 Which of the following statements are true regarding VPN Gateway configuration in VPN Manager? (Choose two.)

Managed gateways are devices managed by FortiManager in the same ADOM

External gateways are third-party VPN gateway devices only

Protected subnets are the subnets behind the device that you don’t want to allow access to over the IPsec VPN

Managed devices in other ADOMs must be treated as external gateways

NO.55 View the following exhibit:

An administrator used the value shown in the exhibit when importing a Local-FortiGate into FortiManager. What name will be used to display the firewall policy for port1?

port1 on FortiGate and WAN on FortiManager

port1 on both FortiGate and FortiManager

WAN zone on FortiGate and WAN zone on FortiManager

WAN zone on FortiGate and WAN interface on FortiManager

NO.56 Refer to the exhibit.

An administrator has created a firewall address object, Training which is used in the Local-FortiGate policy package.
When the installation operation is performed, which IP/Netmask will be installed on the Local-FortiGate, for the Training firewall address object?

192.168.0.1/24

10.200.1.0/24

It will create a firewall address group on Local-FortiGate with 192.168.0.1/24 and 10.0.1.0/24 object values.

Local-FortiGate will automatically choose an IP/Netmask based on its network interface settings.

NO.57 In addition to the default ADOMs, an administrator has created a new ADOM named Training for FortiGate devices. The administrator authorized the FortiGate device on FortiManager using the Fortinet Security Fabric.
Given the administrator’s actions, which statement correctly describes the expected result?

The FortiManager administrator must add the authorized device to the Training ADOM using the Add Device wizard only.

The authorized FortiGate will be automatically added to the Training ADOM.

The authorized FortiGate will appear in the root ADOM.

The authorized FortiGate can be added to the Training ADOM using FortiGate Fabric Connectors.

NO.58 What will happen if FortiAnalyzer features are enabled on FortiManager?

FortiManager will reboot

FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager

FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices

FortiManager can be used only as a logging device.

NO.59 Refer to the exhibit.

You are using the Quick Install option to install configuration changes on the managed FortiGate.
Which two statements correctly describe the result? (Choose two.)

It will not create a new revision in the revision history

It installs device-level changes to FortiGate without launching the Install Wizard

It cannot be canceled once initiated and changes will be installed on the managed device

It provides the option to preview configuration changes prior to installing them

NO.60 An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package, Fortinet, in the custom ADOM1.
Which statement about the global policy package assignment to the newly-created policy package Fortinet is true?

When a new policy package is created, it automatically assigns the global policies to the new package.

When a new policy package is created, you need to assign the global policy package from the global ADOM.

When a new policy package is created, you need to reapply the global policy package to the ADOM.

When a new policy package is created, you can select the option to assign the global policies to the new package.

NO.61 Which two items are included in the FortiManager backup? (Choose two.)

FortiGuard database

Global database

Logs

All devices

NO.62 An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?

By a dollar symbol ($) at the end of the device name

By an at symbol (@) at the end of the device name

By a Question:

By an Asterisk (*) at the end of the device name

NO.63 You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?

Any pending device settings will be installed automatically

Any unused objects from a previous ADOM are moved to the new ADOM automatically

The shared policy package will not be moved to the new ADOM

Policy packages will be imported into the new ADOM automaticallyD

NO.64 View the following exhibit:

Which two statements are true if the script is executed using the Remote FortiGate Directly (via CLI) option? (Choose two.)

You must install these changes using Install Wizard

FortiGate will auto-update the FortiManager’s device-level database.

FortiManager will create a new revision history.

FortiManager provides a preview of CLI commands before executing this script on a managed FortiGate.

NO.65 What is the purpose of ADOM revisions?

To create System Checkpoints for the FortiManager configuration.

To save the current state of the whole ADOM.

To save the current state of all policy packages and objects for an ADOM.

To revert individual policy packages and device-level settings for a managed FortiGate by reverting to a specific ADOM revision

NSE5_FMG-7.0 Exam Practice Questions prepared by Fortinet Professionals: https://www.real4dumps.com/NSE5_FMG-7.0_examcollection.html

The Fortinet NSE5_FMG-7.0 Questions & Practice Test are Available On-Demand [Q42-Q65]

Leave a Reply Cancel reply

Related Posts

Fortinet NSE6_FAC-6.1 Exam Dumps – PDF Questions and Testing Engine [Q14-Q32]

Quality FCP_FGT_AD-7.4 PDF Dumps – FCP_FGT_AD-7.4 Exam Questions [Q18-Q36]

[Q28-Q43] Apr-2023 Realistic NSE7_EFW-7.0 Accurate & Verified Answers As Experienced in the Actual Test!