HPE6-A72 Self-Study Guide for Becoming an Aruba Certified Switching Associate Exam Expert [Q16-Q32]

Rate this post

HPE6-A72 Self-Study Guide for Becoming an Aruba Certified Switching Associate Exam Expert

HPE6-A72 Study Guide Realistic Verified HPE6-A72 Dumps

HP HPE6-A72 certification exam focuses on testing the skills and knowledge of candidates in the areas of network switching, VLANs, inter-VLAN routing, and network security. HPE6-A72 exam consists of 60 multiple-choice questions and has a time limit of 90 minutes. Candidates must score at least 70% to pass the exam and receive their certification.

NO.16 SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?

Option A

Option B

Option C

Option D

NO.17 Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.

NO.18 Which two statements accurately describe stacking with Aruba switches? (Choose two.)

A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.

VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.

The VSF feature is not compatible between AOS-CX and AOS platforms.

A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.

VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.

NO.19 Refer to the exhibit.

The above output is the result of issuing the command show system resource-utilization.
What command should be used to enable terminal output line by line or page by page?

The command page

The command terminal length 30

The command more

The command less

NO.20 Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?

Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.

Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.

Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.

Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.

NO.21 What are the commands to disable SSH and HTTPS services from the default VRF?

Core-1(config)# no ssh server Core-1(config)# no https-server

Core-1# no ssh server vrf default Core-1# no https-server vrf default

Core-1(config)# no ssh server enable Core-1(config)# no https-server enable

Core-1(config)# no ssh server vrf default Core-1(config)# no https-server vrf default

NO.22 Match the switching term to the correct definition.

NO.23 Click on the colored box that corresponds with the line that best represents Multicast traffic flow.

Explanation:
Blue Box

NO.24 Your customer has 349 users in a two-story building.
What are two benefits of a 2-Tier design? (Choose two.)

Layer 2 and Layer 3 protocols run close to the endpoints to better implement ACL and QoS policy at the edge.

Improved performance by offloading processing from the Access layer to the Core.

Use of layer 2 switches at the access layer can process and route traffic from attached APs.

Support for WAN/MPLS, Internet, and Data Center directly on the Collapsed core.

Provides a more cost effective solution given that no additional switches are required for a third tier.

NO.25 Refer to the exhibit.

What configuration is needed in order for “show LLDP configuration” to show this output?

none; LLDP is enabled by default on Aruba switches

configuring LLDP both globally and on the interfaces

enabling LLDP on the interfaces only

configuring LLDP globally only

NO.26 What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?

Better Core router performance by offloading processing

Shifting endpoint access to the Aggregation layer from the Access layer

Using access control lists (ACLs) at the Core to improve performance

Connecting WAN/MPLS and Data center access to the Aggregation layer

NO.27 Match each description to the correct management tool for Aruba AOS-CX.

NO.28 Which two types of routes can be found in the IP routing table of an Aruba AOS-CX switch? (Choose two.)

Local

EIGRP

BGP

ISIS

RIPng

NO.29 Match the switching term to the correct definition.

NO.30 Refer to the exhibit.

What command (output shown above) gives the optics serial number and part number information?

show interface physical

show interface transceiver

show inventory

show interface optics

NO.31 What is the correct description of a Multi-Layer Switch?

a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence

any switch that supports PoE, LLDP-MED and Flow Control

has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router

multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

NO.32 What are two primary concerns regarding layer two loops in a redundant topology? (Choose two.)

routing loops

costs associated with upgrading from copper to fiber

multiple frame copies leading to instability of the MAC address table

security issues with a redundant loop indicating to hackers that a back-door exists

broadcast storms

Loading …

Valid HPE6-A72 Exam Dumps Ensure you a HIGH SCORE: https://www.real4dumps.com/HPE6-A72_examcollection.html

HPE6-A72 Self-Study Guide for Becoming an Aruba Certified Switching Associate Exam Expert [Q16-Q32]

Leave a Reply Cancel reply

Related Posts

Pass HPE6-A79 Exam with Updated HPE6-A79 Exam Dumps PDF 2022 [Q18-Q32]

Free HPE0-J68 Exam Braindumps – New 2023 HP Pratice Exam [Q87-Q104]

HPE6-A72 Questions Pass on Your First Attempt Dumps for Aruba Certified Switching Associate (ACSA) V1 Certified [Q11-Q29]