[Q31-Q55] Best Quality SAP C-IBP-2211 Exam Questions Real4dumps Realistic Practice Exams [2023]

Rate this post

Best Quality SAP C-IBP-2211 Exam Questions Real4dumps Realistic Practice Exams [2023]

Critical Information To SAP Certified Application Associate – SAP IBP for Supply Chain (2211) Pass the First Time

Q31. Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.

Transportation lead times

Maximum lot size

Minimum lot size

Adjusted transport receipts

Aggregated constraints

Q32. What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.

Link two analytics charts.

Rename the charts.

Add process templates.

Display all assigned analytics on a single UI.

Use drill-down functionality.

Q33. Which type of Master Data will be represented by the Master Data Type LOCATIONFR?

Virtual Master Data Type

Reference Master Data Type

Compound Master Data Type

External Master Data Type

Q34. Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.

Increase the use of incremental lot size beyond the frozen horizon.

Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.

Avoid using telescopic time buckets.

Keep the number of fairshare segments small.

Split into multiple planning areas to support weekly vs. daily planning needs.

Q35. How many different time levels can be selected within one planning view?

Only base time levels of the planning area

All time levels available in the time profile

All time levels available in the time profile, restricted by global configuration parameter

Only time levels from the base planning level of selected key figures

Q36. Which sets of chart types are provided within the Analytics Advanced application?Note: There are 3 correct answers to this question.

Comparison Chart Types

Seasonal Chart Types

Trend Chart Types

Geographic Chart Types

Simulation Chart Types

Q37. You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?

The assigned Planning Area must be active.

This application job can be run for multiple time profiles at once.

In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.

A time profile has to be activated so that the application job can proceed.

Q38. Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note:
There are 2 correct answers to this question.

The key figure is calculated and system editable.

The key figure is stored and all editable.

The key figure is stored and system editable.

The key figure is calculated and all editable.

Q39. You want to display and edit data in different Units of Measure (UOM).Which of the following must you consider before you use the UOM?Note: There are 3 correct answers to this question.

Units of measure are usually not time-dependent.

Unit of measure is an attribute of a master data type, such as Product.

Units of measure are usually not time-independent.

Analytics provide the user with the option to select the target unit of measure.

Conversion to the target unit of measure is handled by SAP IBP Excel UI

Q40. Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.

Demand sensing of demand data using predictive analytics tools

Embedded, on-the-fly demand analytics

Detailed statistical analysis of demand data using predictive analytics tools

Consideration of demand-driven analysis for buffer positioning.

Q41. SAP IBP ensures interoperability with which applications?Note: There are 2 correct answers to this question.

Salesforce Sales Cloud

User management in SAP Success Factors

Financial Planning in SAP Analytics Cloud

Business Network in SAP Ariba

Q42. Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.

Periods are identified by an alphanumeric prefix and profiles by an integer.

Both periods and profiles are identified by a unique integer.

Both periods and profiles have start and end dates.

Periods are identified by an integer and profiles by an alphanumeric prefix.

Q43. Which of the following data inputs, when increased, will always cause an increase in the safety stock outputs when the Global (multi-stage) Inventory Optimization operator is run?Note: There are 2 correct answers to this question.

Holding Cost Percentage

Minimum Lot Size

Target Service Level

Transportation Lead Time Error CV

Q44. Which of the following approaches could you take to reduce run times of an optimizer?Note: There are
3 correct answers to this question.

Increase the use of incremental lot size beyond the frozen horizon.

Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.

Avoid using telescopic time buckets.

Keep the number of fairshare segments small.

Split into multiple planning areas to support weekly vs. daily planning needs.

Q45. Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Key Figure Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Non-Confirming Data

Purge Master Data

Q46. Which features apply to quota violations modeled with the optimizer?

Quotas can be modeled for sourcing location, production, and consensus demand.

Because quota violations shouldn’t be possible, the non-delivery cost rate is less than quota violation cost.

Min and Max Quotas have to be the same as sourcing ratios.

The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.

Q47. For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?

Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.

Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.

Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.

Merge analytics and alerts into a new planning area from any sample planning area.

Q48. You are adding a value-based filter to a planning view.Which of the following conditions apply?Note:
There are 3 correct answers to this question.

You can only apply one value-based filter per planning view.

The alerts dashboard is not available if a value-based filter is set for the open planning view.

You can add (or delete) planning objects to a planning view after these filters are applied.

These filters can be used together with attribute totals in the same planning view.

These filters are always applied based on the values stored in the database.

Q49. Which parts of the S&OP high-level process would the Inventory planning and optimization process fit into?Note: There are 2 correct answers to this question.

Management business Review, by providing the inventory targets for endorsement

Demand Review, by using the output of demand planning as input into calculations

Supply Review, by providing an input to supply network planning

Reconciliation Review, by providing inventory parameters for one consolidated plan

Q50. What are some of the available ABC segmentation methods in SAP IBP?Note: There are 2 correct answers to this question.

By Number of Items (Sorted Values)

By Pareto Principle (Sorted and Cumulated %)

By Number of Items (Sorted Average)

By Pareto Principle (Sorted and Calculated Values)

Q51. A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?

IF(“PERIODID4” =”$$PERIODID4CU$$…)

IF(“PERIODID2” =”$$PERIODID2CU$$…)

IF(“PERIODID3” =”$$PERIODID3CU$$…)

IF(“PERIODID5” =”$$PERIODID5CU$$…)

Q52. Which applications are present in the sample model SAPIBP1?Note: There are 3 correct answers to this question.

Demand Driven Replenishment

Response Planning

Sales and Operations Planning

Inventory Optimization

Demand Sensing

Q53. Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.

The total number of attributes that can use subtotals in the planning view can be restricted.

The values of the attribute-based total at the highest attribute level in the planning level can be changed.

Only attribute-based totals can be added to the planning view.

The total value can be added before or after the selected attribute.

Q54. Forecast Error CV is an input to which of the following?

Time-Series-Based Supply Planning Optimizer

Calculate Target Inventory Components in Inventory Planning Profile Operator

Forecast Error Calculation in Inventory Planning Profile Operator

Multistage Inventory Optimization in Inventory Planning Profile Operator

Q55. What are the relevant use cases for helper key figures?Note: There are 2 correct answers to this questions.

Used at any level of calculation level except the Request Level

Used when you have more than three inputs at different planning levels in one calculation

Used by end-users in planning views to help visualize cross-period calculations

Used to break down a large calculation into manageable subcalculations

SAP C-IBP-2211 or SAP Certified Application Associate – SAP IBP for Supply Chain (2211) Exam is a certification exam that validates the knowledge and skills of individuals in the field of SAP Integrated Business Planning (IBP) for Supply Chain. C-IBP-2211 exam measures the candidate’s ability to understand the concepts of IBP, its architecture, configuration, and implementation. SAP Certified Application Associate – SAP IBP for Supply Chain (2211) certification is ideal for professionals who are involved in supply chain planning and management, including consultants, project team members, and business stakeholders.

C-IBP-2211 EXAM DUMPS WITH GUARANTEED SUCCESS: https://www.real4dumps.com/C-IBP-2211_examcollection.html

[Q31-Q55] Best Quality SAP C-IBP-2211 Exam Questions Real4dumps Realistic Practice Exams [2023]

Leave a Reply Cancel reply

Related Posts

[2024] Use Valid Exam C-ARP2P-2302 by Real4dumps Books For Free Website [Q29-Q51]

C-BOWI-43 Dumps with Free 365 Days Update Fast Exam Updates [Q20-Q36]

Jul 11, 2023 Newest C_BYD15_1908 Exam Dumps – Achieve Success in Actual C_BYD15_1908 Exam [Q26-Q42]