[Q24-Q45] Updated ECP-206 Dumps PDF - ECP-206 Real Valid Brain Dumps With 62 Questions!

NEW QUESTION 24
Which action will influence BGP route selection within your AS?

reducing number of hops in the network

changing the default value of the local preference

changing the default link metric

changing the administrative distance for eBGP

NEW QUESTION 25
What is a label-edged router (LER)?

a CE router

a P router

a PE router

a DR router

NEW QUESTION 26
What is the correct abbreviation for the IP address: BFEA:DACA:0000:0000:9390:0000:0000:D91?

BFEA:DACA::9390::D91

BFEA:DACA::9390:0:D91

BFEA:DACA::D91/6

BFEA:DACA::9390:0:0:D91

NEW QUESTION 27
IPv6 link-local addresses are designed to be used in which three situations? (Choose three.)

for neighbor discovery

for local IP communication on the IPv6 capable routers

addressing on a single link for purposes such as auto-address configuration

by routers to forward packets with link-local source addresses to other links

when routers are not present

NEW QUESTION 28
Which statement about IPv6 is correct?

An interface can only be configured with one IPv6 address.

Broadcast has been replaced with multicast.

There are four billion available addresses.

Addresses are not hierarchical and are assigned at random.

NEW QUESTION 29
Which conceptual table created by routing protocols is used when processing an IP packet?

management information base

label information base

traffic engineering data base

forwarding information base

NEW QUESTION 30
Review the exhibit.

Given the routing table shown in the exhibit, what is the next-hop to reach the host 192.168.1.129?

10.126.131.251

10.126.131.252

10.126.131.250

10.126.131.248

NEW QUESTION 31
A network operator wants to make sure voice data is prioritized.
In this scenario, to which Ethernet traffic class should it be assigned.

0

2

4

6

NEW QUESTION 32
Which two features does IPsec provide? (Choose two.)

protecting the length of packets from discovery

protecting packets from modification

controlling the path through the network

hiding the content of packets from observation

NEW QUESTION 33
Which route type is restricted in an OSPF stub area?

Type 1

Type 2

Type 3

Type 5

NEW QUESTION 34
Which two statements are true about link-state routing protocols? (Choose two.)

The advertisement exchange is mainly triggered by a change in the network.

Each router uses a reliable update mechanism to exchange topology information with its neighbors.
C Link-state routing protocols mainly use hop-counts to determine the link cost

A distance vector algorithm is very processor intensive compared to Dijkstra’s algorithm.

Explanation
Link-state routing protocols are one of the two main classes of routing protocols used in packet switching networks for computer communications, the other being distance-vector routing protocols. Examples of link-state routing protocols include Open Shortest Path First (OSPF) and Intermediate System to Intermediate System (IS-IS). The basic concept of link-state routing is that every node constructs a map of the connectivity to the network, in the form of a graph, showing which nodes are connected to which other nodes. Each node then independently calculates the next best logical path from it to every possible destination in the network.
Each collection of best paths will then form each node’s routing table.
Two statements that are true about link-state routing protocols are:
The advertisement exchange is mainly triggered by a change in the network. Link-state routing protocols use a flooding mechanism to distribute information about the network topology to all routers in the same area or domain. This information is encapsulated in link-state packets (LSPs) or link-state advertisements (LSAs), which contain information about the router, its directly connected links, and the state of those links. LSPs or LSAs are sent only when there is a change in the topology, such as a link failure or recovery, or when a periodic refresh timer expires. This way, link-state routing protocols can quickly adapt to network changes and maintain an accurate and consistent view of the network.
Each router uses a reliable update mechanism to exchange topology information with its neighbors.
Link-state routing protocols use a reliable update mechanism to ensure that all routers receive and acknowledge the LSPs or LSAs sent by their neighbors. This mechanism involves sending hello messages to establish and maintain adjacencies with neighbors, sending acknowledgment messages to confirm the receipt of LSPs or LSAs, and requesting missing or outdated LSPs or LSAs from neighbors.
This mechanism ensures that all routers have a synchronized database of LSPs or LSAs, which is used to build a complete network connectivity map and to calculate the shortest path to destinations.
References: Link-state routing protocol – Wikipedia, Ericsson IP Networking – Routing Protocols

NEW QUESTION 35
Which two statements are true about the Ericsson Router 6000 series? (Choose two.)

The Router 6000 uses the same building practice and accessories as the Ericsson Radio System.

The Router 6000 can host containerized applications such as firewalls.

The Router 6000 is solely built as a radio cell site router.

The Router 6000 products range from all-outdoor small site routers to large aggregation routers.

NEW QUESTION 36
What is the purpose of penultimate hop popping?

to reduce the load on the LER

to reduce the load on the LSR

to reduce the load on the LDP

to reduce the load on the LSP

NEW QUESTION 37
What network information is, without additional configuration, shared between two iBGP neighbors by default?

BGP routes learned from an OSPF neighbor

IP address information of loopback interfaces

BGP routes learned from eBGP neighbors

IP address information from all directly connected interfaces

NEW QUESTION 38
Which mismatched field would cause an IS-IS adjacency between two routers to fail?

MTU

SEL

Context

SysID

NEW QUESTION 39
Which two statements are correct for LDP? (Choose two.)

LSRs send UDP hello messages for neighbor discovery.

LSRs send ICMP hello messages for neighbor discovery

LSRs use TCP to negotiate LDP session parameters.

LSRs use UDP for session establishment.

NEW QUESTION 40
What is the CLI command to obtain the software version in Ericsson Router 6000 products?

show sysstat

show version

show log

show release

NEW QUESTION 41
Based on industry standard practice, what is the correct order of DiffServ priority (highest to lowest) for the DiffServ classes: Default Forwarding (DF), Network Control (NC), Assured Forwarding (AF), and Expedited Forwarding (EF)?

EF, NC, AF, DF

EF, AF, NC, DF

NC, EF, DF, AF

NC, EF, AF, DF

NEW QUESTION 42
What is used for Ethernet loop avoidance?

Time-to-Live (TTL)

Poison-Reverse

Split-Horizon

Spanning-Tree

NEW QUESTION 43
What is the function of LSR from an LDP perspective?

The LSR distributes labels of LDP to its FEC peers.

The LSR distributes packets of FEC to its LDP peers.

The LSR distributes packets of LDP to its FEC peers.

The LSR distributes labels of FEC to its LDP peers.

NEW QUESTION 44
Review the exhibit.

Referring to the exhibit, which two Ericsson routers support the 100GE interface? (Choose two.)

Router 6471

Router 6273

Router 6675

Router 6672

NEW QUESTION 45
Review the exhibit.

A service provider wants to connect the sites for two customers (indicated in red and green in the exhibit). The two customers are using the same IP ranges 192.168.0.0/16.
Referring to the exhibit, what should the service provider do to accomplish this task?

Implement L3VPN using the MP-BGP protocol.

Connect each customer to dedicated PEs.

Use a separate OSPF instance for each customer.

Use a unique AS number for each customer.

[Q24-Q45] Updated ECP-206 Dumps PDF – ECP-206 Real Valid Brain Dumps With 62 Questions!

Leave a Reply Cancel reply