Regular Free Updates JN0-231 Dumps Real Exam Questions Test Engine Nov 06, 2023 [Q50-Q72]

Rate this post

Regular Free Updates JN0-231 Dumps Real Exam Questions Test Engine Nov 06, 2023

Practice Test Questions Verified Answers As Experienced in the Actual Test!

The JN0-231 certification exam covers a wide range of security topics, including security policies, security zones, security threats and vulnerabilities, network security devices, and more. JN0-231 exam is designed to test your knowledge and understanding of these topics, as well as your ability to apply this knowledge in real-world scenarios. JN0-231 exam consists of multiple-choice questions and simulations, and it is designed to be completed within 90 minutes.

QUESTION 50
Which statement is correct about Web filtering?

The Juniper Enhanced Web Filtering solution requires a locally managed server.

The decision to permit or deny is based on the body content of an HTTP packet.

The decision to permit or deny is based on the category to which a URL belongs.

The client can receive an e-mail notification when traffic is blocked.

Web filtering is a feature that allows administrators to control access to websites by categorizing URLs into different categories such as gambling, social networking, or adult content. The decision to permit or deny access to a website is based on the category to which a URL belongs. This is done by comparing the URL against a database of categorized websites and making a decision based on the policy defined by the administrator.
Reference:
Juniper Networks SRX Series Services Gateway Web Filtering Configuration Guide: https://www.juniper.net/documentation/en_US/release-independent/junos/topics/topic-map/security-services-web-filtering.html

QUESTION 51
Which two elements are needed on an SRX Series device to set up a remote syslog server? (Choose two.)

Data type

Data throughput

IP address

Data size

QUESTION 52
Which two non-configurable zones exist by default on an SRX Series device? (Choose two.)

Junos-host

functional

null

management

Junos-host and null are two non-configurable zones that exist by default on an SRX Series device. Junos-host is the default zone for all internal interfaces and services, such as management and other loopback interfaces. The null zone is used to accept all traffic that is not explicitly accepted by other security policies, and is the default zone for all unclassified traffic. Both zones cannot be modified or deleted.

QUESTION 53
When creating a site-to-site VPN using the J-Web shown in the exhibit, which statement is correct?

The remote gateway is configured automatically based on the local gateway settings.

RIP, OSPF, and BGP are supported under Routing mode.

The authentication method is pre-shared key or certificate based.

Privately routable IP addresses are required.

QUESTION 54
Which security object defines a source or destination IP address that is used for an employee Workstation?

Zone

Screen

Address book entry

scheduler

QUESTION 55
Which two statements are true regarding zone-based security policies? (Choose two.)

Zone-based policies must reference a source address in the match criteria.

Zone-based policies must reference a URL category in the match criteria.

Zone-based policies must reference a destination address in the match criteria

Zone-based policies must reference a dynamic application in the match criteria.

QUESTION 56
When are Unified Threat Management services performed in a packet flow?

before security policies are evaluated

as the packet enters an SRX Series device

only during the first path process

after network address translation

QUESTION 57
Which IPsec protocol is used to encrypt the data payload?

ESP

IKE

TCP

QUESTION 58
Which Statement is correct about Sky ATP?

The local Sky ATP platform downloads the latest threat from managed site

Sky ATP can provide live threat feeds to SRX series devices

Sky ATP is a local hardware-based security threat analyzer that performs multiple tasks.

Sky ATP relies on the SRX series device to open and analyze suspect file attachments

QUESTION 59
You are assigned a project to configure SRX Series devices to allow connections to your webservers. The webservers have a private IP address, and the packets must use NAT to be accessible from the Internet. The webservers must use the same address for both connections from the Internet and communication with update servers.
Which NAT type must be used to complete this project?

source NAT

destination NAT

static NAT

hairpin NAT

Only static NAT with pool ensures both traffic initiated from inside and outside networks use the same IP address.

QUESTION 60
What must be enabled on an SRX Series device for the reporting engine to create reports?

packet capture

security logging

system logging

SNMP

QUESTION 61
Click the Exhibit button.

What is the purpose of the host-inbound-traffic configuration shown in the exhibit?

to permit host inbound HTTP traffic and deny all other traffic on the internal security zone

to deny and log all host inbound traffic on the internal security zone, except for HTTP traffic

to permit all host inbound traffic on the internal security zone, but deny HTTP traffic

to permit host inbound HTTP traffic on the internal security zone

QUESTION 62
Which UTM feature should you use to protect users from visiting certain blacklisted websites?

Content filtering

Web filtering

Antivirus

antispam

QUESTION 63
You are asked to configure your SRX Series device to block all traffic from certain countries. The solution must be automatically updated as IP prefixes become allocated to those certain countries.
Which Juniper ATP solution will accomplish this task?

Geo IP

unified security policies

IDP

C&C feed

QUESTION 64
Which three Web filtering deployment actions are supported by Junos? (Choose three.)

Use IPS.

Use local lists.

Use remote lists.

Use Websense Redirect.

Use Juniper Enhanced Web Filtering.

QUESTION 65
What must you do first to use the Monitor/Alarms/Policy Log workspace in J-Web?

You must enable logging that uses the SD-Syslog format.

You must enable security logging that uses the TLS transport mode.

You must enable stream mode security logging on the SRX Series device.

You must enable event mode security logging on the SRX Series device.

QUESTION 66
When configuring antispam, where do you apply any local lists that are configured?

antispam feature-profile

antispam UTM policy

advanced security policy

custom objects

user@host# set security utm custom-objects url-pattern url-pattern-name https://www.juniper.net/documentation/us/en/software/junos/utm/topics/topic-map/security-local-list-antispam-filtering.html

QUESTION 67
You want to automatically generate the encryption and authentication keys during IPsec VPN establishment.
What would be used to accomplish this task?

IPsec

Diffie_Hellman

Main mode

Aggregate mode

QUESTION 68
Users in your network are downloading files with file extensions that you consider to be unsafe for your network. You must prevent files with specific file extensions from entering your network.
Which UTM feature should be enable on an SRX Series device to accomplish this task?

Content filtering

Web filtering

Antispam

URL filtering

QUESTION 69
You want to deploy a NAT solution.
In this scenario, which solution would provide a static translation without PAT?

interface-based source NAT

pool-based NAT with address shifting

pool-based NAT with PAT

pool-based NAT without PAT

QUESTION 70
Your company has been assigned one public IP address. You want to enable internet traffic to reach multiple servers in your DMZ that are configured with private address.
In this scenario, which type of NAT would be used to accomplish this tasks?

Static NAT

Destination NAT

Source NAT

NAT without PAT

QUESTION 71
Which two IPsec hashing algorithms are supported on an SRX Series device? (Choose two.)

SHA-1

SHAKE128

MD5

RIPEMD-256

QUESTION 72
The free licensing model for Sky ATP includes which features? (Choose two.)

C & C feeds

Infected host blocking

Executable file inspection

Compromised endpoint dashboard

Loading …

Juniper JN0-231 exam is designed to test the skills and knowledge of individuals who want to become certified as a Security Associate with Juniper Networks. Security, Associate (JNCIA-SEC) certification is ideal for those who wish to pursue a career in network security, as it validates their ability to perform basic security functions on Juniper Networks products. JN0-231 exam covers a variety of topics, including security concepts, security policies, security zones, and security threats.

Pass Juniper JN0-231 Exam in First Attempt Easily: https://www.real4dumps.com/JN0-231_examcollection.html

Regular Free Updates JN0-231 Dumps Real Exam Questions Test Engine Nov 06, 2023 [Q50-Q72]

Leave a Reply Cancel reply

Related Posts

100% Accurate Answers! Nov-2022 JN0-422 Actual Real Exam Questions [Q17-Q35]

New 2023 Guaranteed Success with Real4dumps JN0-104 Dumps Juniper PDF Questions [Q78-Q99]

[Jul 08, 2023] New JN0-349 Exam Dumps with High Passing Rate [Q49-Q66]