[Apr 14, 2025] CWDP-304 Questions Truly Valid For Your CWNP Exam! [Q168-Q185]

NO.168 During a post-validation survey, you find an area lacking any detectable Wi-Fi signal at all It is located behind an elevator shaft What is a common solution to this problem?

NO.169 After designing a WLAN infrastructure using predictive design software. What’s the best way to validate the predictive design in the physical space before deployment, if time and budget allow for it?
Response:

NO.170 In most WLAN design tools, after defining project parameters or during the project creation wizard what action will you take before you can begin the actual design process?

NO.171 During the deployment of a WLAN the customer complains that the chosen locations for several APs are ruining the aesthetics of the building Instead of changing AP locations and requiring a redesign, what action can you recommend1?

NO.172 You are selecting external antennas for use in a bridge link deployment. What chart should you request from the antenna vendors to make an accurate selection?

NO.173 An MSA commonly addresses at least which two legal categories?
Response:

NO.174 What is a valid 40 MHz channel configuration in the 2.4 GHz ISM band where channels 1-11 are permitted?

NO.175 What differences exist between VLANs in wireless and wired domains?
Response:

NO.176 What term refers to the security practice of obfuscating actual data from unintended receivers as the data crosses the transmission medium?
Response:

NO.177 What is the most cost-effective way to accurately measure the height of a ceiling when ladder use is not allowed?

NO.178 In this question, you will compare the mobility processes of a network that supports WPA2-Personal and WPA2-Enterprise. Assume the use of a
15-character
ASCII passphrase for WPA2-Personal and EAP-TTLS/MSCHAPv2 with WPA2-Enterprise. Also, assume that proprietary roaming protocols are not supported.
When a device transitions from one BSS to another within the same ESS, what step must be performed in the WPA2-Enterprise transition that are not performed in the WPA2-Personal transition?

NO.179 In a convention center, you have received complaints about the WLAN infrastructure. At this moment, the are only two APs in one auditorium.
After analyzing the situation, you determined that there are more client devices that the infrastructure was designed for. There are only two APs to support more than 300 devices using the Wi-Fi at the same time.
What should you do to make the Wi-Fi work as expected?
Response:

NO.180 When designing for a PTP outdoor link, what important consideration should be made about local vegetation?
(Choose all that apply.)
Response:

NO.181 Assume that your network operates in a regulatory domain that allows use of the entire 5 GHz space allowed in the 802.11ac amendment. In your upcoming
802.11ac deployment, you would like to take advantage of the performance improvements that result from channel bonding. However, after extensive testing, you have determined that your mission-critical WLAN should not use channels requiring DFS support.
Given those two criteria (enable channel bonding and disable DFS channels), in the 5 GHz spectrum, how many non-overlapping 40 MHz channels will your system be able to use?

NO.182 When surveying an existing WLAN infrastructure for a possible redesign, you use two Wi-Fi USB adapters to collect RSSI data and two USB spectrum analysis adapters to collect RF spectrum data. Since your laptop doesn’t have enough USB ports, you use a 4-port powered USB 3.0 hub.
What issues could be caused by the use of USB 3.0 that will impact your site survey?

NO.183 Your customer requires a security solution in which client credentials are used and the authentication server must have a certificate with optional client certificate use. Which EAP method would be the best fit for their requirement?

NO.184 When doing some frame capturing over the air during a voice call, you realized that frames on the downlink (from the AP to the client) direction are not being transmitted with the correct UP value for voice frames, but on the uplink (from the client to the AP) direction are being transmitted correctly. What’s the cause of this issue?

NO.185 Location technology (RTLS) can use which of the following methods?(Choose all that apply.) Response: