Achieve The Utmost Performance In L4M2 Exam Pass Guaranteed [Q24-Q39]

Through-life Management involves the life-cycle management of the products, services and activities required to deliver a fully integrated capability to the customer, while reducing the cost of ownership for the customer.
Diagram, table Description automatically generated

Source: Andrew Graves
With through-life management, buyer not only cares about the physical asset but also other factors like customer services and maintenance.

With strategic suppliers, the aim should be to work co-operatively with them to find ways of reducing costs to achieve a target cost. It is necessary to work with the suppliers in carrying out open book costing by having first persuaded them of the need to do it. Open book can be used to establish a Target Cost, a Compensation Event value and can eventually be used to ensure the payment of actual costs to an organization. A number of forms of contract cater for this functionality of which only the NEC goes to into any great depth of methodology.
If the suppliers worry about leak of confidential information, procurement team can suggest them to sign a non-disclosure agreement. The buying organisation should also comply with data protection regulations. The Employer / individual responsible for a project’s costs should ultimately take a pragmatic and sensible approach with regard to commercially or personally sensitive data provided by the contractor. The primary goal of all open book cost management is to provide Employer comfort and security in the accuracy of commercial data; this effectively means striking a balance between undertaking full audits and blind faith.

Through-life Management involves the life-cycle management of the products, services and activities required to deliver a fully integrated capability to the customer, while reducing the cost of ownership for the customer.
Diagram, table Description automatically generated

Source: Andrew Graves
The installation stage occurs in In-Service Operations. At this stage, the machinery is shipped and installed on the buyer’s premises and check to ensure that it is working to the standards set out in the design specification.

Barriers to Entry to Agriculture: If stakeholders are going to address the need for new, conserva-tion-minded farmers, they must understand the barriers these farmers encounter when transitioning into the profession. A review of the literature revealed a number of barriers-most of them structural-to entry to agriculture. While each barrier is distinct, they are all interconnected. Though not an exhaustive list, the following barriers are ones that were most frequently mentioned in the literature:
– Access to Affordable Land
– Startup Capital
– Lack of Agricultural Knowledge and Experience
– Lack of Knowledge about Farm Business Planning
– Discrimination
– Student Loans
– Limited Access to Markets
– Affordable Housing and Affordable Healthcare
Source: Exploring the Barriers to Entry to Agriculture: Challenges Facing Beginning Farmers in North Carolina – Kelley Robbins-Thompson

Value Analysis (VA) is concerned with existing products. It involves a current product being ana-lysed and evaluated by a team, to reduce costs, improve product function or both. Value Analysis exercises use a plan which step-by-step, methodically evaluates the product in a range of areas. These include costs, function, alternative components and design aspects such as ease of manufac-ture and assembly.
According to the Value Methodology standard, there are 6 phases to a Value Analysis:
– Information
– Function Analysis
– Creative
– Evaluation
– Development
– Presentation
1. Information
In this first phase, the team attempts to understand why the project exists and who or what it is to produce. They obtain project data, present the original design or product concepts, and understand the project scope. Schedule, costs, budget, risk, and other non-monetary issues are studied until the team is comfortable with the concept of the project, what it is to produce, and who its end users are.
This step also includes things like site visits and meetings with the project team, if required. Project documents like plans, drawings, specifications, and reports are obtained and the value engineering team becomes familiar with them.
2. Function Analysis
This step represents the meat and potatoes (core) of the value analysis. The team attempts to determine the functions the project serves. Functions come in two forms:
– Primary functions are those that represent the reason for the project’s existence, for example, a building project might have adequate plumbing as a primary function.
– Secondary functions are those that the project serves without being core to the project. For example, a building project might have as a secondary function maintaining the view of the neighboring building.
The functions are described in verb/noun pairs, such as “supply water to all suites,” or “Maintain view of adjacent park.” For a project like this, the team should come up with 10 – 15 functions. You might be surprised how many secondary functions exist for most projects. Subject matter experts would be a great resource, but in their absence an appropriate level of brainstorming and analysis are necessary.
The team should also identify value-mismatched functions to focus the improvements on. For ex-ample, maybe a large obstruction is preventing the view of the adjacent park from too many suites resulting in a potential mismatch of the cost vs. functional benefit. This is investigated in the next step.
3. Creative
This phase represents the generation of improvement ideas. The team develops alternative ways that the project can perform the functions that have been identified. At this step, the functions are looked at individually and each one gets a list of alternative ways to perform the function. There is no judging between the importance of the various functions.
4. Evaluation
At this stage, a priority is given to each project improvement idea. The ideas are discussed and potential costs are determined. Once the risk-reward profile of each idea is itemized, the team has determined which ideas are worth implementing into the project or feature.
A few years ago, there was a pedestrian bridge built near my home which was originally designed for emergency vehicles. Although this type of design is standard practice for the bridges of this type, the value engineering team identified that emergency vehicle passage was not needed (verb/noun pair = ‘maintain passage for emergency vehicles’). Also, a second major outcome of this value analysis was to change the design to an aesthetic, curved bridge because it was in a prominent location. The redesign of the bridge cost some money but this was more than made up by the cost of the bridge construction. Thus, the value analysis paid for itself about 10 times over in the reduced construction cost, and the bridge was significantly more aesthetic.
5. Development
Once the value improvement options have been whittled down to the ones that make sense, the value engineering team develop the options to the point of passing them back to the original project team. They must be clearly written and explained so that the project owner and stakeholders can understand how it benefits the project and act on it. Any potential negative factors are identified. Potential costs and cost savings are itemized.
6. Presentation
This last phase represents the presentation of the alternatives to the stakeholders. Often value engineering represents a change in the normal practices that people are used to, an “out of the box thinking.” Thus the best salesperson on the team is often the best one to do the presentation.
Some typical products of a value engineering analysis are a briefing document, risk analy-sis, present worth analysis, advantages vs. disadvantages, etc.
Reference:
LO 3, AC 3.4

Composing a compelling business case requires the proposer to write in the language of the approvers.
Generally, approvers are business executives or important shareholders whose major interest is the profitability of the firm. Business case proposer may embed the following contents:
– Return on investment: according to Investopedia, Return on Investment (ROI) is a performance measure used to evaluate the efficiency of an investment or compare the efficiency of a number of different investments. ROI tries to directly measure the amount of return on a particular investment, relative to the investment’s cost. A business case would seem more attractive if the proposal is expected to have high ROI.
– Time to market: Time-to-market (TTM) refers to the time from which a company initially con-ceives a product or service idea to the point when the actual product or service is accessible to buyers in the market (Afonso et al., 2008). The speed at which companies can introduce products into the market is critical for sustaining competitive advantage, and the reduction of product development cycle time has become a strategic objective for many technology-driven firms.
– Customer satisfaction: Keeping existing customer to stay in the business can affect greatly on the profit margin of a firm. A new proposal that finds the way to innovate while keeping the current customers satisfied may gain the interest of senior management.
– Improving productivity: Productivity is the measure of how efficient and effective a firm is. Im-proving the productivity means that with the same or lesser input, better output is generated. In-creasing productivity also improves the profitability of a company.
– Risk management: Any business activity contains inherent risks. For example, for a mining company to be truly responsible, it must keep all of its workers safe, healthy and motivated, meet the expectations of the local community and government for the region in which it is operating, ensure it impacts on the environment positively if at all, as well as achieve the financial objectives set by its investors for both the short and long term. Managing risks well improves the production throughput and maintains customer satisfaction.
In the scenario, Robert is trying to convince the senior management to adopt e-procurement system by insisting on potential productivity improvement. This is the right approach. A business plan should engage and please senior management and directors. An appealing business case tells them how important things to the business (such as productivity, return on investment, customer satisfaction or costs) are affected by the plan.

Primary activities consist of inbound logistics, operations, outbound logistics, sales & marketing, service.
Second activities consist of firm infrastructure, human resource management, technology development and procurement

Support activities (also known as secondary activities) include Firm infrastructure, Human resource management, Technology development and Procurement. Developing digital SRM technology to manage suppliers better is Technology development.
LO 1, AC 1.2

The instrument plays a crucial role in steel manufacturing because it presents in the majority of products, in which case lacking this instrument would have significant impact on the organisation’s output (production lines stop or damaging other machine). Otherwise, the risk of supply is high because there is limitation in supply. Therefore, it is considered as a strategic item in term of Kraljic’s portfolio matrix. Procurement manager should form partnership with suppliers to maximise the value.
The following graph illustrates Kraljic’s portfolio matrix:

Barriers to entry is an economics and business term describing factors that can prevent or impede newcomers into a market or industry sector, and so limit competition. The most obvious barriers to entry are high start-up costs and regulatory hurdles which include the need for new companies to obtain licenses or regulatory clearance before operation. Also, industries heavily regulated by the government are usually the most difficult to penetrate. Other forms of barrier to entry that prevent new competitors from easily entering a business sector include special tax benefits to existing firms, patent protections, strong brand identity, customer loyalty, and high customer switching costs.
In the scenario, the new factory for chipset manufacturing costs billions of dollars, which indicates high set-up costs. Also, the incumbent manufacturers have reached economies of scale, allowing them to produce the components at optimal price.
The above descriptions are compiled from recent reports on current chip shortage (2021).

The instrument plays a crucial role in steel manufacturing because it presents in the majority of products, in which case lacking this instrument would have significant impact on the organisation’s output (production lines stop or damaging other machine). Otherwise, the risk of supply is high because there is limitation in supply. Therefore, it is considered as a strategic item in term of Kraljic’s portfolio matrix. Procurement manager should form partnership with suppliers to maximise the value.
The following graph illustrates Kraljic’s portfolio matrix:

Value analysis is often defined as a systematic process for improving the value of a product, service or project. It is typically used in the following ways:
– To determine the value of each component used
– To find cost reduction opportunities by optimising the components used Segment analysis helps procurement and supply to shape and manage the supply markets.
There is no concept known as Variety reduction.
Standardisation is the process which is used to reduce varieties of products or parts.
In this scenario, the company’s objective is cost reduction, then value analysis or value engineering is more likely to be applied. Also the company aims at reducing variety, standardisation can be combined with value analysis to produce the best results.
LO 3, AC 3.4

Detailed Explanation:An output specification defines the desired outcome or result of the procurement rather than specifying how the result should be achieved. A requirements brief outlines the goals, leaving flexibility for the supplier to propose solutions. Reference: CIPS Level 4, Output Specifications in Procurement.

Products used in agriculture can be subject to shortage due to natural disasters.
Reference:
LO 2, AC 2.1

Those items make up small portion of spend and the supply risk is low. So it is tactical item according to Kraljic portfolio matrix. Procurement should bundle these items into larger contracts, simplify procurement process.
LO 2, AC 2.1